… between layers, and often, the distance of lateral slip increases into the interlayer interface.
Thus, when dull coal is fractured, the geometry of the hydraulic fracture is often characterized …

… In summary, on the one hand, the pore structure and distribution directly affect the macroscopic
mechanical properties of the interfaces in 3D printed concrete. On the other hand, the …

… interlayer interface mechanical properties and plastic toughness of the coatings. Although
the mechanical … of CNTs can improve the mechanical properties of composite coatings, there …

… from 1 to 8, the mechanical strength of BN nanosheets is … interlayer interactions and hence
sliding tendencies in these two materials under indentation. The significantly better interlayer …

… Ni interlayer and found that Ti/Ni interface and Ni/stainless steel interface show good bonding
properties. … [42] studied feasibility of Mo/Cu diffusion welding by adding Ni interlayer. In …

… X-ray spectroscopy, electron probe microanalysis, and X-ray diffraction revealed the formation
of a three-layered interface between Mg and Al without the interlayer. The thickness of the …

… interface; whereas, stainless steel–nickel (SS–Ni) interface is free from intermetallic compounds
up to 900 C processing temperatures. At 950 C, Ni–Ti interface … –nickel interface. Nickel …

… at the interface between pristine graphene and interlayer-… domain sequences and their
interfaces with the graphene … 3.1, the mechanical properties of the fully interlayer-bonded AB…

… The continuous transition of properties across interface is just the advantage of interlayer …
Due to the asymmetry of mechanical properties with respect to the interfaces in Fig. 4, the crack …

… interface, devoid of defects, is obtained in interlayer laced explosive clads. The mechanical
properties of interlayer … with different interlayers are higher than conventional two layer clad. …