In order to acquire TiAl composites with a multi-scale reinforcing phase, and to improve the
microstructure and tensile properties at elevated temperatures, TiAl alloys have been …

In order to improve the mechanical properties of TiAl alloys, TiAl composites with different
solidification paths were synthesized by metallurgical method. Results show the TiC …

In order to improve the mechanical properties of TiAl alloys, micro-nano Ti 2 AlC-reinforced
TiAl composites were successfully fabricated by means of spark plasma sintering (SPS) …

In the present work, Ti 2 AlC/TiAl composite with a bioinspired laminated structure was
fabricated by an in-situ reactive vacuum hot-pressing sintering using flake powder …

In the present work, Ti 2 AlC/TiAl composites with network architecture were fabricated by
the method of spark plasma sintering (SPS) at different temperature using Ti–48Al–2Cr–2Nb …

TiAl alloys have the merit of high specific strength, but usually suffer from poor room-
temperature plasticity and inadequate high-temperature strength, limiting their practical …

Abstract TiAl-5wt.% Ti 2 AlC-3wt.% Mn composites reinforced by the addition of Mn and in
situ synthesized Ti 2 AlC nanoparticles with a novel microstructure were fabricated. The …

Abstract Ternary Ti-30.7 wt% Al-xC alloys were prepared with different carbon content (x=
0.2, 0.4, 0.8, 1.2, 1.6, and 2.0 wt%) by vacuum arc melting in order to improve the strength …

The samples of in-situ α 2 (Ti 3 Al)+ γ (TiAl) matrix composite reinforced with Ti 2 AlC
particles were prepared by a centrifugal casting of Ti-46.4 Al-5.1 Nb-1C-0.2 B (at.%) alloy …

TiAl-based composites reinforced with different high volume fractions of nearly network Ti 2
AlC phase have been successfully prepared by mechanical alloying and hot-pressing …