… and microstructure characteristics of the matrix alloy have a remarkable influence on mechanical
properties of the resulting metal matrix composites [20], so the microstructure of the TiAl …

… , including the Ti 2 AlC ceramic particles, γ-TiAl … the TiAl alloy, the lattice parameters of the
TiAl composites changed (Table 2), which indicates that the TiAl phase in the TiAl composites …

… of TiAl matrix composites with excellent properties. The content includes four aspects of TiAl
matrix composites: reinforcement selection, configuration design, interfacial microstructure, …

… Ti 5 Si 3 /TiAl composites were successfully prepared by pressure infiltration and subsequent
reactive annealing. Final microstructure of Ti 5 Si 3 /TiAl composites was dependent on the …

… for the microstructure design and performance optimization of the TiAl matrix composites. …
-Ti 2 AlC/TiAl composite with full lamellar microstructure. Finally, the as-sintered Ti 2 AlC/…

… Ti 2 AlC/TiAl composites are usually fabricated with a homogeneous configuration by in-situ …
the Ti 2 AlC/TiAl composites with the homogeneous configuration are far from achieving the …

… S4) are used to study the atomic configurations between the α 2 -Ti 3 Al phase and the γ-TiAl
phase. The result shows that the interface between the α 2 -Ti 3 Al phase and the γ-…

… High temperature deformation behaviour and microstructure were investigated in cast in-situ
TiAl matrix composite reinforced with carbide particles. Samples of the in-situ composite …

… The grain size of the TiAl matrix in 4 vol% TiB 2 /TiAl composite was about 13 μm. … TiAl
matrix in the TiB 2 /TiAl–xCr composites. With the addition of 3 at.% Cr, the grain size of the TiAl …

… hierarchical microstructure design of Ti 2 AlC/TiAl composite … Different from the
traditional homogeneous configuration or … 2 AlC/TiAl composite (denoted as HH-Ti 2 AlC–TiAl-composite) …