… strain rate sensitivity of UHPC. This paper presents a review and analysis of such literature.
… Furthermore, since the intent of the review is to examine DIF as a function of strain rate, only …

… quantitative description of UHPC at high strain rates. Differences in macroscopic strain-rate-effects
occur due to a significantly reduced amount of the moisture effect (reduced capillary …

… strain rate are proposed for each of the components (matrix, fibers, fiber/matrix interface) in
this paper in order to properly simulate the strain rate effect … Static tension tests of UHPC and …

… 4) have dimensions smaller than the standard size specimens in order to achieve high
strain rate and stress equilibrium. Since size effect is inherent to UHPC strength, the quasi-static …

… [45] reported that the dynamic strength was increased as well as the static strength with
the addition of steel fibers, and UHPC showed a noticeable strain rate effect, the peak stress …

… and its matrix (UHPC) is investigated at four high stress rates (from 400 to 1000GPa/s). The
… A significant strain rate effect for the tensile strength and a more moderate effect in the case …

… and failure behavior of UHPC under tension and flexure at various strain rates. DIC analysis
was used to determine the cracking characteristics and strain-rate variations. The following …

… dense ultra high performance concrete (UHPC) matrix … impact significantly increased as the
strain rate (or stress rate) increased. The enhancement of flexural strength at high strain rates …

… [17] investigated the strain rate sensitivities of UHPC in direct tension at strain rates of about
16 s −1 . The tensile strength DIF were 1.52 and 1.94 for two un-reinforced UHPC, and 2.60 …

… the strain rate sensitivity of strain hardening UHP-FRC in tension at low … effect of strain rate
on material tensile parameters. The mixtures proportions and mechanical properties of UHPC …