Determining dielectric constants using a parallel plate capacitor

TT Grove, MF Masters, RE Miers - American journal of physics, 2005 - pubs.aip.org
… derivation of the effect of dielectrics on capacitance,20 the dielectric constant arises from an
… Small plate separations are required for appreciable capacitances which require the use of …

Dependence of breakdown field on dielectric (interelectrode) thickness in base-metal electroded multilayer capacitors

AD Milliken, AJ Bell, JF Scott - Applied physics letters, 2007 - pubs.aip.org
… Such capacitors are a cost-effective replacement for Pd ∕ … B ( d ) for single-layer capacitors
to MLCs. We assume that we … find that it works well for electrode separations of 6 – 22 μ m ⁠. …

Reaching state-of-the art requirements for MIM capacitors with a single-layer anodic Al2O3 dielectric and imprinted electrodes

E Hourdakis, AG Nassiopoulou - Applied Physics Letters, 2017 - pubs.aip.org
… of the MIM capacitor. With a 3 nm thick anodic Al 2 O 3 dielectric, the capacitor with the …
a 280% increase in capacitance density compared to the flat electrode capacitor, reaching a …

Nanoscale dielectric capacitors composed of graphene and boron nitride layers: a first-principles study of high capacitance at nanoscale

VO Özçelik, S Ciraci - The Journal of Physical Chemistry C, 2013 - ACS Publications
… model, we observe interesting quantum size effects at small separations, which recede as
the distance between the graphene plates increases. Because the principle objective of using …

Alignment and performance considerations for capacitive, inductive, and optical proximity communication

A Majumdar, JE Cunningham… - IEEE Transactions on …, 2010 - ieeexplore.ieee.org
… can ensure that the effective chip separations (including dielectrics) are kept under a fixed
… of the reasons for the chip separation limit for capacitive PxC is the parasitic capacitance

Electrode‐based causes of delaminations in multilayer ceramic capacitors

JG Pepin, W Borland, P O'Callaghan… - Journal of the …, 1989 - Wiley Online Library
capacitors (MLC’s). They are defined as a separation of the electrode and dielectric layers
… Poor adhesion of the dielectric tape layers to dried electrode prints during MLC buildup can …

Zinc oxide nanowire-poly (methyl methacrylate) dielectric layers for polymer capacitive pressure sensors

YS Chen, GW Hsieh, SP Chen, PY Tseng… - … applied materials & …, 2015 - ACS Publications
separations (or electric dipoles), as illustrated in Figure 6. Hence, the total charge capacity
(and induced electric field) of the dielectric film increases; and, the change in capacitance in …

Designing tunable capacitive pressure sensors based on material properties and microstructure geometry

SRA Ruth, Z Bao - ACS Applied Materials & Interfaces, 2020 - ACS Publications
… In this work, we investigated the dielectric layer deformation and dielectric change in … lengths
and separations. This is approximately the size at which the slope of the curve for the initial …

FEM and experimental studies of flexible pressure sensors with micro-structured dielectric layers

B He, Z Yan, Y Zhou, J Zhou, Q Wang… - … of Micromechanics and …, 2018 - iopscience.iop.org
separations of these two capacitors (table 3). The initial electrodes separations of the capacitor
… of the pyramid height ratio of the dielectric layer of a capacitive E-skin sensing unit both …

Metal-doped graphene layers composed with boron nitride–graphene as an insulator: a nano-capacitor

M Monajjemi - Journal of Molecular Modeling, 2014 - Springer
dielectric capacitor composed of a few dopants has been investigated in this study. This
capacitor includes metallic graphene layers which … size effect at small separations in our model. …