… In this paper, we propose a MMI splitter with variable splitting ratio. InGaAsP/InP material
system … A novel InGaAsP/InP power splitter with variable splitting ratio has been designed and …

… In this paper, we propose a MMI splitter with variable splitting ratio. InGaAsP/InP material
system … A novel InGaAsP/InP power splitter with variable splitting ratio has been designed and …

… In this paper, we propose a MMI splitter with variable splitting ratio. InGaAsP/InP material
system … A novel InGaAsP/InP power splitter with variable splitting ratio has been designed and …

… , the splitting ratios … interference, the splitting ratio varies with the normalized width variation,
thus offering the possibility for exploiting it further in the design of variable power ratio splitter …

… of multimode interference (MMI) couplers, the splitting and … :N splitters for N up to 8 and
achieved a 1:2 MMI splitter with ±… Most of our initial work was based on the InGaAsP/InP material […

… A splitting ratio of around 0.12 dB (51: 49) has been achieved for an MMI section length
of … Using this technique, they have demonstrated the monolithic integration of an InGaAsP-InP …

… (A) The SWG with variable width is etched in the multimode … ratio of 23.74 dB. To realize
multi-channel power beam … 1 × 2 power splitter using a shallowly etched multimode interference …

… and multi-mode interference (MMI) couplers, AWG filters, ring filters, polarization splitters and
… Polarization diversity is an effective scheme to cope with this issue: The lightwave is split …

… The loss due to the splitter is compensated by amplification in the SOA, however splitting into
a … A multi-mode interference (MMI) switch generates multiple modes from the input signal …

… The splitting ratios are then a simple function of the taper … In Section 111, we apply the Butterfly
concept to 2x2 power splitters… 3 or 4(a), leads to variable splitting ratios. For the device “B” …