… stopping the motor. Even if the over-load protective device is of auto reset type ie, if its
contact … A and B are running, we will be able to get this function by connecting normally open …

… some exposure to electrical protection systems to derive maximum benefit from this book. This
… T2 then only the protection on one leg connecting T2 is called into operation to isolate this …

… lever, and the retarding torque developed is practically nil. In … that it must be reset by hand,
and for this purpose a reset rope is … of contacts working in conjunction with magnetic switches. …

… to protect all low-voltage contacts from dust by means of suitable … a motor restart during an
operation. An open-phase … For lathe work, a main-current switch with lever control by operator …

… all unnecessary relays and contacts from the electrical ones. … interlocking between the stop
and the resetting devices, the … to the interlock by a rocking lever. The drag would fall off as …

… In one case, in order to avoid the necessity of installing grounding The first paper of a series
… , will close a contact. One solenoid of a provided for very low current values, changing later …

… machine safety especially guarding and protective systems in … and constructed as to prevent
the operator from having any part … ” as there is minimal contact between the hazard and the …

… changing its structure to be the domain of control functions. … do not prevent damage to
equipment: they operate after some … the contact enclosure at the same potential as the contacts …

… to prevent the operator from having any part of his body in the danger zone during the operating
… is minimal contact between the hazard and the operator. There may be time to withdraw …

… This is a separate tool and is simply a lever which permits an … the contacts away from the
contact assembly center stop pin … Spring (3) resets the switch after the breaker contacts open …