Intermittent turning (IT) is characterized by a different context than continuous turning (CT). The cutting tool is shocked each time it goes offload and engages a new surface. This interruption causes severe cutting conditions, which fatally affect the performance parameters. The purpose of this study is to assess the effects of four cutting factors, tool nose radius (r), cutting speed (Vc), feed rate (f), and depth of cut (ap), on the following output performance parameters: surface roughness (Ra), cutting temperature (T), and cutting tool wear (VB) during turning (IT) AISI D3 cold work tool steel. A triple CVD (AI2O3/TiC/TiCN)-coated carbide cutting tool was used. A Taguchi L9 (3^ 4) experimental design was adopted for carrying out the experiments in intermittent turning. To improve the performance parameters based on three (3) highly particular scenarios that fulfill industrial criteria, the desirability function (DF) and the grey relational analysis method (GRA) were used. Finally, the optimization findings of the two strategies were compared in order to evaluate the performance of each method.