… fracture mechanics (LEFM) and nonlinear fracture mechanics (NLFM), respectively. It is shown
that the fracture energy G c for bimaterial interfaces … crack lies within the interface, and an …

… behavior of a bimaterial interface were undertaken. Whereas fracture of concrete and rock
… is a lack of knowledge as far as the fracture behavior of rock/concrete interface under mixed …

… interfacial fracture mechanics of cementitious … bi-material interfaces. For the validation of
this part of derivation, we consider two case studies: (1) first, identical and bi-material interfaces …

… The interfacial fracture toughness of bone–dental cement system tested in this study indicate
that the interface is weaker in the mixed mode loading than in pure shear or tensile mode. …

… The objectives of this study are to determine and validate the interface fracture parameters
of composite MPC and cement concrete ASCB specimens. The study is grounded in the …

… fracture toughness for different mixed modes. Banks-Sills [33] conducted tests on bi-material
CSTBD specimens and determined mixed-mode … reaction of iron oxide in cement minerals. …

… -plane interface crack of dissimilar anisotropic PEMO-elastic bimaterial solids. In this research,
the impermeable and permeable interface cracks in dissimilar PEMO bimaterial solids are …

… the fracture patterns of the bi-material Brazilian disks. … fracture along the groove, mixed
mode of sawtooth fracture along the groove and tensile fracture of the matrix, and tensile fracture …

… loading conditions (Table 4), we simulated the bimaterial interfacial SIF analysis by … and
implant material on the mixed-mode SIF at the interfaces (bone–cement and cement–implant) of …

… Fracture at a bi-material interface is essentially mixed-mode, even when the geometry is
symmetric with respect to the crack and loading is of pure Mode … layer of cementitious material is …