Natural gas ignition delay times behind reflected shock waves: Application to modelling and safety

N Lamoureux, CE Paillard - Shock Waves, 2003 - Springer
N Lamoureux, CE Paillard
Shock Waves, 2003Springer
Ignition delay times have been measured behind reflected shock waves using infrared and
ultraviolet emission spectroscopies in the wide ranges of temperature (1485-1900 K),
pressure (0.3-1.3 MPa), equivalence ratio (0.5-2) and dilution with argon (95-99%). For a
mixture composed of several alkanes, it has been shown that the ignition delay can be
evaluated from a combination of individual expressions obtained for each alkane (methane,
ethane and propane). This method is applied to ignition delay time calculations for mixtures …
Abstract
Ignition delay times have been measured behind reflected shock waves using infrared and ultraviolet emission spectroscopies in the wide ranges of temperature (1485-1900 K), pressure (0.3-1.3 MPa), equivalence ratio (0.5-2) and dilution with argon (95-99%). For a mixture composed of several alkanes, it has been shown that the ignition delay can be evaluated from a combination of individual expressions obtained for each alkane (methane, ethane and propane). This method is applied to ignition delay time calculations for mixtures of several natural gases and validated with a particular Algerian natural gas. The measured ignition delay time are compared with those computed using a detailed kinetic mechanism. Agreement is generally satisfactory but the deviation between measurements and calculations increases when the ethane relative fraction increases in natural gas. Dynamic parameters of detonation in air are evaluated from these correlations. The predicted kinetic parameters of detonation (cell width) with a natural gas from Abu Dhabi, especially rich in ethane, are about half as those estimated with a Russian natural gas.
Springer
以上显示的是最相近的搜索结果。 查看全部搜索结果