On the performance of a baffled glazed-bladed entrance solar air heater

AE Kabeel, MH Hamed, ZM Omara… - Applied Thermal …, 2018 - Elsevier
Applied Thermal Engineering, 2018Elsevier
The performance of a baffled glazed-bladed entrance air heater (BGBSAH) was
experimentally investigated and compared with a conventional one at the same operating
conditions. The solar air heater was modified at the entrance region. This region was
covered with a glass coverinstead of a steel one to increase the heating area exposed to
solar radiation (IR). In addition, the entrance region was boosted by guide blades to affirm a
good air distribution inside the heater. Baffles attached to nineteen longitudinal fins were …
Abstract
The performance of a baffled glazed-bladed entrance air heater (BGBSAH) was experimentally investigated and compared with a conventional one at the same operating conditions. The solar air heater was modified at the entrance region. This region was covered with a glass coverinstead of a steel one to increase the heating area exposed to solar radiation (IR). In addition, the entrance region was boosted by guide blades to affirm a good air distribution inside the heater. Baffles attached to nineteen longitudinal fins were fixed inside the heater. These baffles were used to increase the heat transfer area, the length of air flow path, and the heat capacity of SAH via increasing the mass of the material. Three various numbers of baffles (170, 410 and 800) were used. Moreover, four values of air flow rates ranged from 0.013 to 0.04 kg/s were investigated. The results showed that, at the same mass flow rate, the performance of SAH was directly proportional to the baffles number. In addition, the results revealed that the maximum daily temperature difference obtained from the BGBSAH with 800 baffles was 51.9 °C compared to 22.7 °C for the conventional one at 0.013 kg/s. Besides, the daily efficiency was improved by 29.91–51.69% in case of BGBSAH with 800 baffles compared to the conventional one. For conventional SAH the average cost per kW is 0.0146 $ while for BGBSAH are 0.00733, 0.00787 and 0.0084 $ for 800, 410 and 170 baffles, respectively.
Elsevier
以上显示的是最相近的搜索结果。 查看全部搜索结果