… fabrication of crystalline patterned oxide nanostructures such … the overall accumulated
pulses/site due to overlapping was … STO substrates irradiated with a single laser pulse at fluences …

… focused-ion-irradiation with molecular-beam epitaxy provides … mode of FIB irradiation, with
overlap of sequential beam … (FIB) patterned hole arrays, followed by blanket irradiation of the …

… Patterned arrays of epitaxial crystal were produced by … stallization, by intense pulses of
laser radiation, of … the feasibility of using focused spatially overlapping pulses to achieve fine …

… , 4) repetition rate, 5) overlap rate 6) thermal conductivity of the … 300 C was irradiated by the
laser, epitaxial growth of SnO 2 … has been investigated by pulsed laser irradiation of solution-…

… an epitaxial Ge layer on Si(100), patterned with a SiO2 hard mask. The patterns were then
irradiated with ArF excimer laser pulses … were identical with overlapping uncertainties. Both Pb …

… using monochromatic CuKα radiation (λ = 1.54060 Å). The composition of the of the films was
analyzed by energy-dispersive X-ray spectroscopy (EDS), using a … structure patterned over …

… been patterned in the inside of glasses by fs pulsed laser … , 60, and 90 patterned by laser
irradiation has been reported in the … It is found that the surface of the overlapped laser-irradiated …

… of patterned micro- and nanostructures or in the growth of films on temperature sensitive
substrates. It is well known that laser radiation … to 80% of beam overlapping, in order to minimize …

… were patterned by imaging a mask under mild irradiation … study of the laser irradiation of
epitaxial yttria-stabilised zirconia (… pulse irradiation in each position, with a partial overlapping of …

… per location is about 13 times that of the applied pulses/site due to overlapping. Irradiation
… fluence, 80% beam overlapping, 100 C substrate temperature, and 500 pulses/site to fully …