Mesh-reinforced cellulose acetate (CA)-based membranes were prepared for forward osmosis (FO) by immersion precipitation. Casting compositions such as CA percent and 1, 4-dioxane/acetone ratio and also preparation conditions such as evaporation time, coagulation bath and annealing temperatures were tested for membranes’ performance. The results were compared with commercially CTA membranes. The best membrane (17.9% polymer and 1, 4-dioxane/acetone ratio of 1.89) showed water flux of 9.3 L/m²h (LMH) and RSF of 0.536 mol NaCl/m²h. Moreover, the membrane structure was reinforced by a polyester mesh, which created micro pores in the back of the membrane. This caused higher water flux and RSF compared to membranes without mesh. FO membrane prepared under best conditions, had a smoother surface than commercial ones. This feature enhances the fouling properties of the membrane, which can be appropriate for wastewater treatment applications.