… Stage 1 fuel is injected through the lance and stage 2 fuel is injected along the swirler slots.
Both stages are continuously in operation, the ratio is adjusted to ensure flame stability and …

… during furnace heat-up. The modifications evaluated included: 1 Lowered excess air 2 …
burners (low-NOx burners) 3 Flue gas recirculation 4 Steam injection 5 Altered fuel injection …

… (SEV) burner and fuel lance into its GT24 and GT26 upgrades 2011 sequential reheat
combustion system. … The fuel injection through the SEV lance was optimized for the new SEV …

… The injection system is designed to produce “hot, dilute oxidant” by jet … burners consist of
a single oxygen and a single fuel lance, only one O2 lance is required per Bloom burner. The …

… use of hydrogen as a fuel in the reheating furnace, using the same burner configuration as
with … • Reducing the mass flow rate of the hydrogen injection through the burners until similar …

… Furthermore it is shown that even a reheat combustor can be … which fuel (both gaseous and
liquid) is injected though a lance. … both the mixing in the burner and the fuel placement. Since …

… The SEV combustor considered in LES comprises of burner, fuel lance and combustor. As a
… In summary, it is evident that due to the injection of higher amount of fuel, the LPL combustor …

… this case being delivered with dual fuel EV and SEV lances instead of the normal gas-only …
central pilot injector by a premix injector. This leads to a burner system with two fuel stages, …

… reheat burner technology suitable for Hydrogen-rich fuels. … This is achieved through injecting
fuel from a central lance in … The fuel injector assembly for the new reheat burner concept …

… The role of inhibiting thermal NO x by injecting O 2 around the burner is also considered,
causing local quenching of flames. O 2 was injected into the flame using lance pipes at an …