… evaluated hypoeutectic Al–Fe alloys. For any examined … 8 shows a typical SEM micrograph
for an Al–1.0 wt%Fe alloy after … to measurements performed by EDAX microprobe and, an …

… The EDAX analysis was done as a confirmation test to iron … Pin-on-disc machine was used
for evaluating the wear and friction … Like other aluminium alloys/composite, Al-Fe composite …

… Samples were analysed with a FEI NovaNano SEM, and EDX was done with the attached
EDAX EDX system. Oxidation testing was carried out on all samples in a static air furnace at …

… ,Mn) phases formed during the solidification of the Al-2 wt% Fe-1 wt% Mn alloy … , SEM-EDS,
and EBSD, with non-destructive 3D X-ray Computed Tomography (XCT) analysis to evaluate …

… amount of porosity in alloys C and D compared to alloys A and B; SEM images of two
fracture … Therefore, in order to improve the evaluation of the effect of HIPing, only the samples …

… The tests were carried out with an SEM-EDAX X-ray microprobe (AMETEK, Inc., New Jersey,
… -Morris, MA Evaluation of elastic modulus and hardness of Fe–Al base intermetallics by …

… alloys was investigated by TEM and FIB combined with SEM. … been determined as Al 14 Fe
2.8 Si 2 by TEM/EDX. Although … cell we obtained from the evaluation of SAED patterns. The …

… review it has been found that the development of aluminum … SEM image of the as procured
Al and B 4 C powders are … The EDAX analysis of the sintered composites preforms are …

… The tests were carried out with an SEM-EDAX X-ray microprobe (AMETEK, Inc., New
Jersey, USA), and the chemical composition was determined by analyzing the radiation energy …

… SEM investigations combined to EDS analysis of the interfaces revealed the formation of two
kinds of alloys: an FeAl in the range 200–400 C and an Fe 2 Al 5 … with an EDAX detector for …