… channel model for the analysis of superconducting cables. The aim … , electric and hydraulic
transients in cables. The model is devised … data on current distribution in a two-strand cable. …

… network and aims at the analysis of the current distribution in the resistive saddle material …
between joint saddle and cable strands. The model of the superconductive cable is made up of …

… was prepared and characterized by Dr Takayasu at MIT and in this report the data published
in [8] and [9] is further analyzed. This solution gave a symmetric joint with a homogeneous …

… analysis of superconducting cables. Firstly, a summary on the most important projects of
HTS cables is presented and after that different topologies and structures of the HTS cables are …

… 1]the results of the analysis and the … current-carrying cores of superconductive power cables.
Theoretical studies make it possible to design cable cores with a uniform current distribution …

… of sheet currents and analysis of circuits with holes. As an example, we … current loops via
top layer wires and the current around the loop in the ground plane. For the circuit analysis, this …

… of an initially superconducting cable to an arbitrary energy input, abstracting from the origin
and nature of the disturbance spectrum. The main result of the analysis is the stability margin, …

… A more recent analysis of the voltage–current relation and current distribution in
superconducting cables [9] considers the effect of boundary-induced coupling currents given by the …

… the critical current distribution from the resistive critical current transition, The analysis has
been … We present results on both Nb3Sn and Nb-Ti wire composites. Relevant features of the …

… So far we proposed a theory to analyze current distributions in a single-phase coaxial cable
… coaxial cable [1]–[3]. A three-phase cable usually requires three single-phase coaxial cables …