… , particularly for densely packed fin arrays, imposes operational … a multi-objective topology
optimization approach to optimize sink … topology optimization approach, considering the pin-fin …

… considered to be constant through out the analysis and the conduction along the wall is …
fins with convective tip have been analyzed and the global validation study was made for the fin …

… work, the inverse analysis has been done in order to predict the, fin length, L base thickness,
t b , and width, W satisfying a given fixed volume, V ̃ . To solve the optimization problem, the …

… optimization of plate fin exchangers. Present research is the first use of this method in optimal
plate fin … code was developed for optimization of plate fin exchangers and three various …

… The heat exchanger has plate-fins containing periodically … heat exchanger involves short
rectangular fins attached in 8 × 8 … results validated the suitability of the proposed approach. …

… While the approach presented provides an optimized heat sink, the fin height exceeds the
maximum allowable height of 25 mm predicated by the board-to-board spacing, as shown in …

… The Whale optimization … have analyzed the longitudinal fin models with three shapes
rectangular, concave parabolic, and trapezoidal. To present a mathematical model for this analysis, …

… In this section, it may be noted that the optimization of fin has never been done in the
design of fins for the two-dimensional heat conduction when temperature gradient exists in the …

… Moreover, the fins with optimum profile are long and narrow; they need larger … of optimization
approach is more popular. Following this approach attempts have been made to design fins …

… to optimize the fin design parameter of serrated fin and the obtained results are beneficial
to guide the design of plate-fin … design approaches of PFHEs are difficult to optimize the fin …