Compressive creep tests have been performed on separated, free‐standing, air
plasmasprayed thermal barrier coatings (zirconia doped with 7‐8 wt% yttria) under constant …

Specimens of plasma‐sprayed‐zirconia thermal‐barrier coatings with three different
porosities and different initial particle sizes were deformed in compression at initial loads of …

Summary Plasma‐sprayed 8wt% yttria‐stabilized zirconia (8YSZ) thermal barrier coatings
(TBCs) have been demonstrated to exhibit nonlinear hysteretic elastic behavior by …

The high-temperature deformation of atmospheric plasma-sprayed ZrO2 thermal barrier
coatings (TBCs) was investigated. Compression creep tests were performed at temperatures …

The effect of porosity on the thermal diffusivity and elastic modulus has been studied on
artificially aged, free-standing thermal barrier coatings (TBCs) produced by air plasma spray …

The mechanical behaviour of free standing air plasma sprayed (APS) partially yttria
stabilised zirconia (P-YSZ) thermal barrier coatings (TBC) at room temperature and at …

During operation at elevated temperatures, sintering processes can significantly influence
the mechanical properties of thermal barrier coatings (TBCs) by increasing Young's modulus …

Neutron diffraction was used to measure the residual strain field in plasma-sprayed zirconia
thermal barrier coatings (TBCs). Data were collected at the British neutron spallation source …

Specimens of plasma-sprayed zirconia thermal barrier coatings with three different
porosities and different initial particle sizes were deformed in compression at initial loads of …

Thermal barrier coating (TBC) specimens have been prepared by plasma spraying. A
vacuum plasma spray (VPS) MCrAlY bond coat and atmospheric plasma spray (APS) …