Efficient 2.87 μm fiber laser passively switched using a semiconductor saturable absorber mirror

J Li, SD Jackson, Y Liu, DD Hudson - Optics Letters, 2012 - research.aston.ac.uk
A passively switched Ho 3+, Pr 3+ codoped fluoride fiber laser using a semiconductor
saturable absorber mirror (SESAM) is demonstrated. Q-switching and partial mode-locking …

Semiconductor saturable absorber mirror passively Q-switched 2.97 μm fluoride fiber laser

JF Li, HY Luo, YL He, Y Liu, L Zhang… - Laser Physics …, 2014 - iopscience.iop.org
A diode-cladding-pumped mid-infrared passively Q-switched Ho 3+-doped fluoride fiber
laser using a reverse designed broad band semiconductor saturable mirror (SESAM) was …

Passively Q-switched Er-doped fiber laser using a semiconductor saturable absorber mirror

M Wang, C Chen, C Huang, H Chen - Optik, 2014 - Elsevier
A passively Q-switched Er-doped fiber laser using a semiconductor saturable absorber
mirror (SESAM) is demonstrated. Q-switching is observed with the output power produced at …

Semiconductor saturable absorber mirror passively Q-switched fiber laser near 2 μm

W Yang, J Hou, B Zhang, R Song, Z Liu - Applied optics, 2012 - opg.optica.org
A passively Q-switched fiber laser near 2 μm is achieved with a semiconductor saturable
absorber mirror (SESAM) as a saturable absorber. Stable Q-switched pulses are generated …

Passively Q-switched and mode-locked Tm-Ho co-doped fiber laser using a WS2 saturable absorber fabricated by chemical vapor deposition

Y Yang, S Yang, C Li, X Lin - Optics & Laser Technology, 2019 - Elsevier
We demonstrate a passively Q-switched and mode-locked Tm-Ho co-doped fiber laser
based on a WS 2 saturable absorber (SA) fabricated by chemical vapor deposition method …

High power passively Q-switched Er3+-doped ZBLAN fiber laser at 2.8 µm based on a semiconductor saturable absorber mirror

X Lai, J Li, H Luo, C Zhu, Y Hai, Y Shi… - Laser Physics …, 2018 - iopscience.iop.org
We report a 976 nm diode-pump passively Q-switched Er 3+-doped ZBLAN fiber laser
based on a semiconductor saturable absorber mirror (SESAM). The maximum average …

Passively Q-switched mid-infrared fluoride fiber laser around 3 µm using a tungsten disulfide (WS2) saturable absorber

C Wei, H Luo, H Zhang, C Li, J Xie, J Li… - Laser physics …, 2016 - iopscience.iop.org
In this letter, we demonstrate a passively Q-switched Ho 3+/Pr 3+ co-doped fluoride fiber
laser centered at 2865.7 nm using a tungsten disulfide (WS 2) saturable absorber (SA) for …

S-band Q-switched fiber laser using MoSe2 saturable absorber

H Ahmad, MA Ismail, S Sathiyan, SA Reduan… - Optics …, 2017 - Elsevier
Abstract A passively Q-switched S-band fiber laser using Molybdenum Diselenide (MoSe 2)
saturable absorber (SA) is proposed and demonstrated. The SA is fabricated by depositing …

Passively Q-switched 0.1-mJ fiber laser system at 1.53? m

R Paschotta, R Häring, E Gini, H Melchior, U Keller… - Optics letters, 1999 - opg.optica.org
We demonstrate a passively Q-switched fiber laser system generating pulses with as much
as 0.1?? mJ of pulse energy at 1.53? m and a> 1? kHz repetition rate. These results were …

High repetition-rate narrow bandwidth SESAM mode-locked Yb-doped fiber lasers

J Liu, J Xu, P Wang - IEEE Photonics Technology Letters, 2011 - ieeexplore.ieee.org
A stable narrow bandwidth semiconductor saturable absorber mirror mode-locked Yb-doped
fiber laser was demonstrated in a short linear cavity with fundamental repetition rate up to …