Two layered thermal barrier coatings (TBCs) with different bond coat surface roughnesses
were produced by air plasma spraying. Isothermal oxidation test was carried out to evaluate …

Failure of air plasma sprayed (APS) thermal barrier coatings (TBCs) with a double-layered
bond coat was investigated. The bond coat consists of a dense layer near the substrate side …

The durability of atmospheric plasma-sprayed thermal barrier coatings (APS TBCs) with a
double-layer bond coat was evaluated via isothermal cycling tests under 1120° C. The bond …

This work investigates the failure mechanism of an air plasma spraying (APS) thermal
barrier coatings (TBCs) with various bond coat (BC) surface toughness under constant …

Significant internal oxidation was found in air plasma sprayed (APS) thermal barrier coating
(TBC) samples with double-layered high velocity oxy-fuel (HVOF) NiCoCrAlY bond coats …

Interfacial toughness is an important factor to address thermal barrier coating's (TBC)
durability. In this paper, a promising method, based on interfacial indentation, is used to …

Thermal barrier coatings (TBCs) were deposited by an Air Plasma Spraying (APS)
technique. The coating comprised of 93 wt.% ZrO2 and 7 wt.% Y2O3 (YSZ); CoNiCrAlY …

A conventional thermal barrier coating (TBC) system is made up of a multilayered coating
system that comprises a metallic bond coat including oxidation-resistant MCrAlY and a …

The delamination resistance in a plasma-sprayed thermal barrier coating (TBC) system was
evaluated by means of a modified four-point bending test. In this work, in order to study the …

The adhesion of various interfaces in thermal barrier coating systems strongly affects their
stability and thermal cycling life. A new spontaneous debonding technique and the four point …