A 304 stainless steel plate was lap joined to a CP-Ti one by friction stir welding technique.
Stainless steel was selected as the top member. Sound dissimilar joints were achieved …

Friction stir welding parameters were adjusted in order to achieve defect-free dissimilar lap
joint of CP-Ti to 304 stainless steel. Titanium as a softer material was selected to be on the …

Friction stir welding was performed to accomplish dissimilar lap joining of commercially pure
titanium (CP-Ti) to 304 stainless steel (SUS304). The joining speed was varied from 25 to …

The feasibility of dissimilar friction stir welding (FSW) in overlap configuration between Ti–
6Al–4V alloy (Ti64) and AISI 304 austenitic stainless steels (304SS) was investigated …

Aluminum 1060 and titanium alloy Ti–6Al–4V plates were lap joined by friction stir welding.
A cutting pin of rotary burr made of tungsten carbide was employed. The microstructures of …

Aluminum (1060Al) and stainless steel (SUS321, austenitic) were friction stir lap welded
using a stir tool consisting of a cutting pin and a concave shoulder. Two welding processes …

Friction stir lap welding-a precursor to the friction stir cladding-stainless steel on plain
carbon steel was attempted. Refined microstructure with fully recrystallized austenitic grains …

Titanium and stainless steel components are assembled together in many industrial
applications. This makes it desirable to join the titanium and stainless steel. The objective of …

Dissimilar metal joints of stainless steel to titanium find extensive industrial applications
especially in the nuclear industry. However, it is well known that fusion welding of stainless …

Titanium alloy TC1 and Aluminum alloy LF6 were butt jointed and lap jointed by friction stir
welding (FSW), and the influence of process parameters on formation of weld surface, cross …