Superhard Ta–O–N coatings produced on titanium using induction physical vapor deposition

V Koshuro, M Fomina, A Zakharevich, A Fomin - Ceramics International, 2022 - Elsevier
Due to simulation by the finite element method, the temperature fields in the “inductor–
tantalum target–titanium product” system were calculated depending on the inductor current …

High-hardness carbide coatings and their production on X82WMoCrV6-5-4 steel using induction physical vapor deposition

V Koshuro, M Fomina, A Fomin - Composite structures, 2022 - Elsevier
Due to simulation by the finite element method, the temperature fields in the “inductor–
titanium target–product” system were calculated depending on the inductor current and …

Superhard titania coatings produced on titanium using induction heat treatment

A Fomin - Ceramics International, 2019 - Elsevier
Superhard titania coatings were prepared by high-temperature oxidation of commercially
pure (cp) titanium using induction heat treatment (IHT). IHT was performed at the …

Functionally graded “Ti-base+(Ta, Ta2O5)-coatings” structure and its production using induction heat treatment

M Fomina, V Koshuro, A Shumilin, A Voyko… - Composite structures, 2020 - Elsevier
On the surface of the “Ti-base+ Ta-coating” layered system, tantalum oxide coatings were
obtained by induction heat treatment (IHT) within 600–1600° C for 1–120 s. It was …

Effects of gas pressure on microstructure and performance of (Ti, Al, Zr) N coatings produced by physical vapor deposition

W Liu, A Li, H Wu, Y Long, J Huang, X Deng… - Ceramics …, 2016 - Elsevier
In this study, a novel quaternary (Ti, Al, Zr) N coating was successfully fabricated via multi-
arc ion plating technique on the Si 3 N 4 ceramic substrate. A series of (Ti, Al, Zr) N coatings …

Investigation of(Ti, Al) N Based Coatings Grown by Physical Vapor Deposition

V Podgursky, B Torp, R Traksmaa, R Veinthal… - Materials …, 2005 - matsc.ktu.lt
Abstract Hard (Ti, Al) N based coatings were deposited by means of physical vapor
deposition (PVD) arc ion-platting PLATIT unit on top of the stainless steel AISI 304 and hard …

Titanium oxide coatings formed by plasma spraying followed by induction heat treatment

V Koshuro, E Osipova, O Markelova, M Fomina… - Ceramics …, 2023 - Elsevier
Porous titanium-containing coatings were formed on titanium samples by atmospheric
plasma spraying. The resulting samples were subjected to induction heat treatment in an …

Properties of titanium oxide synthesized by pulsed metal vacuum arc deposition

YX Leng, JY Chen, H Sun, P Yang, GJ Wan… - Surface and Coatings …, 2004 - Elsevier
In this work, TiO2 films were deposited on Ti6Al4V and silicon (100) substrates using pulsed
metal vacuum arc deposition. The as-deposited samples were annealed at 800° C for 30 …

Structure and mechanical properties of arc evaporated Ti–Al–O–N thin films

J Sjölén, L Karlsson, S Braun, R Murdey… - Surface and coatings …, 2007 - Elsevier
The structure, mechanical properties, and machining performance of arc evaporated Ti–Al–
O–N coatings have been investigated for an Al0. 66Ti0. 34 target composition and O2/(O2+ …

Novel aluminum-rich Ti1− xAlxN coatings by LPCVD

I Endler, M Höhn, M Herrmann, R Pitonak… - Surface and Coatings …, 2008 - Elsevier
Today, Ti1− xAlxN coatings represent a standard PVD coating for cutting tools. Fcc-Ti1−
xAlxN is a metastable homogeneous phase with excellent properties such as high hardness …