The work is devoted to the calibration of the developed thermoelectric detectors with
different sensitive elements. A pulsed laser diode with a power of 5 W was used as a …

1 Ishlinsky Institute for Problems in Mechanics of the RAS, Moscow, Russia; 2 Institute on
Laser and Information Technologies-Branch of the Federal Scientific Research Centre …

The study is devoted to assessing the applicability of the manufactured thermoelectric
sensor for functioning in shock tubes to measure instantaneous heat fluxes occurring in …

The study is devoted to assessing the applicability of the manufactured thermoelectric
sensor to measure pulsed heat fluxes in shock-wave processes. It is shown that the created …

Thermal measurements were carried out using the sensors on anisotropic thermoelements
during normal shock wave reflection with Mach number M= 3... 5. The method of processing …

The possibility of using a thermoelectric detector (TD) to measure the ignition delay time of a
combustible mixture behind the front of a reflected shock wave is demonstrated. This device …

The processes occurring when a thermoelectric detector generates an output signal due to
the effect of conductive and radiation heating on its sensitive element are considered. The …

The problem of flight safety of high-speed aircrafts is primarily related to the reliability of
engines, which, in turn, depends on the correct understanding of the processes of ignition …

The proposed methods for determining the dynamic characteristics of heat fire detectors in
the time and frequency domains, focused on the use of existing thermal chambers. The …

The results of computer simulation of heat distribution processes taking place after
absorption of single photons of 1 eV-1 keV energy in three-layer sensor of the thermoelectric …