Flexural behavior of reinforced concrete (RC) beams having various layers of conventional
concrete (CC) and steel fiber reinforced concrete (SFRC) were investigated in this study …

The building of structures from steel fibre reinforced concrete (SFRC) in the external and
conventional reinforced concrete (RC) in the internal layer represents an economical …

Ductility is one of the most important requirements of RC design besides other requirements
such as strength and stiffness. In recent years, concrete beams with a large amount of …

Flexural behavior of lightly and heavily reinforced steel fiber concrete beams was
investigated. The test series consisted of 20 singly reinforced beams having 180× 250× …

Seven full-scale concrete beam specimens are tested under gradually increasing monotonic
loading to investigate their overall flexural response due to the addition of both metallic and …

The structural integrity of concrete is known to improve by the incorporation of fibres in
recent days. A 10% of Ground Granulated Blast furnace Slag (GGBS) and 10% of Silica …

Nonlinear numerical analysis of nine reinforced concrete beams with dimensions (150 x 200
x 1200) width, height and length, respectively, was carried out through the finite element …

ABSTRACT A total of fourteen beams, 100× 150 mm in cross-section were tested in the
laboratory over an effective span of 2000 mm. Two of them were used as reference beams …

Sažetak Fibre Reinforced Polymer (FRP) bars can be used as an alternate for reinforcing
bars to avoid corrosion of steel. Samples of reinforced concrete beams cast with normal or …

Given that one of the most concrete and concrete construction materials with suitable
compressive strength, ductility, tensile and flexural strength is low. For this purpose, in the …