This contribution deals with thermal cycling of thermal barrier coatings (TBCs) with NiCrAlY
and NiCoCrAlY bond-coats, and yttria stabilized zirconia (YSZ) top-coat that were prepared …

This paper focuses on thermal cycling failure of pre-oxidized plasma-sprayed thermal barrier
coatings (TBCs) with NiCrAlY and NiCoCrAlY bond-coats and yttria-stabilized zirconia (YSZ) …

The structural changes and failure mechanism of thermal barrier coatings (TBCs) during
thermal shock cycling were investigated. TBCs consisting of CoNiCrAlY bond coat and …

Thick thermal barrier coatings consisting of NiCrAlY bond coating and a 1.4 mm thick
Zirconia-based top coating were air plasma sprayed onto grit blasted nickel-base substrates …

It is known that residual stress is the main factor causing the final failure of thermal barrier
coatings (TBCs). However, it is still unclear how the stress governs the cracking sequence …

Microstructural changes, damage initiation and spallation of thermal barrier coatings (TBC),
which were deposited by air plasma spraying (APS) and consisting of ZrO2–7 wt …

This article addresses the predominant degradation modes and life prediction of a plasma-
sprayed thermal barrier coating (TBC). The studied TBC system consists of an air-plasma …

High-temperature thermal fatigue causes the failure of thermal barrier coating (TBC)
systems. This paper addresses the development of thick TBCs, focusing on the …

The study of thermal barrier coatings (TBC's) has been widely studied in the past years as
well as the failure mechanisms associated with them due to the complexity of these multi …

Thermal barrier coatings (TBCs) with CoNiCrAlY bond-coat and 0.3 mm thick zirconia top-
coat were air plasma sprayed (APS) onto a nickel-base super alloy, Hastelloy-X and 316L …