Integrated Equivalent Circuit and Thermal Model for Simulation of Temperature-Dependent LiFePO4 Battery in Actual Embedded Application
A computational efficient battery pack model with thermal consideration is essential for
simulation prototyping before real-time embedded implementation. The proposed model …
simulation prototyping before real-time embedded implementation. The proposed model …
An electrical–thermal coupling model with artificial intelligence for state of charge and residual available energy Co-estimation of LiFePO4 battery system under …
The LiFePO4 (LFP) battery tends to underperform in low temperature: the available energy
drops, while the state of charge (SOC) and residual available energy (RAE) estimation error …
drops, while the state of charge (SOC) and residual available energy (RAE) estimation error …
Parameter optimization of an electrochemical and thermal model for a lithium-ion commercial battery
PM Muñoz, RM Humana, T Falagüerra… - Journal of Energy …, 2020 - Elsevier
In this work, a LiFePO 4/C commercial cylindrical battery cell is modeled with a P2D model
coupled with a 2D axisymmetric heat transfer model to adequately represent the …
coupled with a 2D axisymmetric heat transfer model to adequately represent the …
Experimental investigation and thermal modelling of a series connected LiFePO4 battery pack
The present paper reports the results from modelling and experimentation with a lithium-ion
battery pack operating at room temperature and under varying discharge rates. The variation …
battery pack operating at room temperature and under varying discharge rates. The variation …
Numerical Simulations for Indirect and Direct Cooling of 54 V LiFePO4 Battery Pack
In this study, three-dimensional thermal simulations for a 54 V Lithium-ion battery pack
composed of 18 LiFePO4 pouch battery cells connected in series were conducted using a …
composed of 18 LiFePO4 pouch battery cells connected in series were conducted using a …
Comparison of lumped and 1D electrochemical models for prismatic 20Ah LiFePO4 battery sandwiched between minichannel cold-plates
In this paper, we present a detailed comparison study on the prediction accuracy by two
different and simplified battery models, namely Lumped and Li-ion (1D electrochemical) …
different and simplified battery models, namely Lumped and Li-ion (1D electrochemical) …
Thermal modeling of large prismatic LiFePO4/graphite battery. Coupled thermal and heat generation models for characterization and simulation
This paper deals with the thermal modeling of a large prismatic Li-ion battery (LiFePO
4/graphite). A lumped model representing the main thermal phenomena in the cell, in and …
4/graphite). A lumped model representing the main thermal phenomena in the cell, in and …
Improved Realtime State-of-Charge Estimation of LiFePO Battery Based on a Novel Thermoelectric Model
Li-ion batteries have been widely used in electric vehicles, and battery internal state
estimation plays an important role in the battery management system. However, it is …
estimation plays an important role in the battery management system. However, it is …
Coupled Electrochemical-Thermal Simulations and Validation of Minichannel Cold-Plate Water-Cooled Prismatic 20 Ah LiFePO4 Battery
This paper discusses the quantitative validation carried out on a prismatic 20 Ah LiFePO4
battery sandwiched between two minichannel cold-plates with distributed flow having a …
battery sandwiched between two minichannel cold-plates with distributed flow having a …
Thermal analysis of large-capacity LiFePO4 power batteries for electric vehicles
C Lin, S Xu, Z Li, B Li, G Chang, J Liu - Journal of power sources, 2015 - Elsevier
Excellent design of a thermal management system requires good understanding of the
thermal behaviors of power batteries. In this study, the electrochemical and heat …
thermal behaviors of power batteries. In this study, the electrochemical and heat …