Two-dimensional temperature measurements in diesel piston bowl using phosphor thermometry

N Takada, I Sakata, H Yanagihara, J Lindén, M Richter… - 2009 - sae.org
Phosphor thermometry was used during fuel injection in an optical engine with the glass
piston of reentrant type. SiO2 coated phosphor particle was used for the gas-phase …

Piston temperature measurement by use of thermographic phosphors and thermocouples in a heavy-duty diesel engine run under partly premixed conditions

T Husberg, S Gjirja, I Denbratt, A Omrane, M Aldén… - 2005 - sae.org
Piston temperature experiments were conducted in a single-cylinder heavy-duty Diesel
research engine, based on the Volvo Powertrain D12C engine both by use of optical …

A first application of thermographic phosphors in a marine two-stroke diesel engine for surface temperature measurement

F Abou Nada, J Hult, C Knappe… - Internal …, 2014 - asmedigitalcollection.asme.org
Phosphor thermometry is applied for the first time in a large-bore two-stroke diesel engine.
The work proves the practicality of phosphor thermometry in large-bore engines. The …

Study on heat losses during flame impingement in a diesel engine using phosphor thermometry surface temperature measurements

C Binder, A Matamis, M Richter, D Norling - 2019 - sae.org
In-cylinder heat losses in diesel engines decrease engine efficiency significantly and
account for approximately 14-19%[1, 2, 3] of the injected fuel energy. A great part of the heat …

Comparison of heat losses at the impingement point and in between two impingement points in a diesel engine using phosphor thermometry

C Binder, A Matamis, M Richter, D Norling - 2019 - sae.org
In-cylinder heat losses in diesel engines reduce engine efficiency significantly and account
for a considerable amount of injected fuel energy. A great part of the heat losses during …

[图书][B] Phosphor thermometry on surfaces-A study of its methodology and its practical applications

C Knappe - 2013 - lup.lub.lu.se
Phosphor Thermometry is a term describing an optical measurement technique for remote
temperature sensing. Its working principle is based on the temperature-sensitive emission …

Phosphor thermometry for internal combustion engines

JS Armfield, RL Graves, DL Beshears, MR Cates… - 1997 - sae.org
Temperature measurement of internal components and surfaces can enhance
understanding of thermal processes that occur during engine operation. Such …

Laser-induced phosphorescence measurements of combustion chamber surface temperature on a single-cylinder diesel engine

JT Kashdan, G Bruneaux - 2011 - sae.org
Non-intrusive, crank-angle resolved measurements of piston temperature have been
performed in a single-cylinder direct-injection (DI) Diesel engine operating under highly …

Simultaneous measurements of in-cylinder temperature and velocity distribution in a small-bore diesel engine using thermographic phosphors

NJ Neal, J Jordan, D Rothamer - SAE International Journal of Engines, 2013 - JSTOR
In-cylinder temperature and velocity fields were quantified simultaneously in an optically
accessible, small-bore diesel engine. A technique utilizing luminescence from Pr: YAG …

Heat loss analysis of a steel piston and a YSZ coated piston in a heavy-duty diesel engine using phosphor thermometry measurements

C Binder, FA Nada, M Richter, A Cronhjort… - SAE International Journal …, 2017 - JSTOR
Diesel engine manufacturers strive towards further efficiency improvements. Thus, reducing
in-cylinder heat losses is becoming increasingly important. Understanding how location …