Abstract The synthetic CaO/Ca 3 Al 2 O 6 (prepared from carbide slag, aluminum nitrate
enneahydrate, and glycerol water solution by combustion synthesis) as a CO 2 sorbent …

Abstract A Ca 3 Al 2 O 6-stabilized carbide slag from calcium looping cycles for CO 2
capture was proposed as a H 2 S sorbent in zero emission carbon process. The H 2 S …

The carbide slag is an industrial waste from chlor-alkali plants, which can be used to capture
CO 2 in the calcium looping cycles, ie carbonation/calcination cycles. In this work, the cycled …

A new CO 2 sorbent was prepared from carbide slag, aluminum nitrate hydrate and glycerol
water solution by combustion synthesis method. The effects of the sorbent preparation …

Mg-stabilized carbide slag (MSCS) was fabricated with carbide slag, magnesium nitrate
hydrate and a by-product of biodiesel from transesterification by combustion, and was used …

Sulfation of calcium-based sorbent is bound to occur during carbonation or calcination of the
sorbent in a calcium looping system if SO2 is present in the system, and it will influence the …

Calcium looping cycle for post-combustion CO2 capture has gained increasing attention
worldwide. However, CaO-based sorbents derived from natural sources for calcium looping …

The calcium looping cycles method has been identified as an attractive method for CO2
capture during coal combustion and gasification processes. However, it is well-known that …

The effect of the presence of HCl on cyclic CO 2 capture behavior of calcium-based sorbent
in the calcium looping process was investigated. When HCl was present in the carbonation …

CaO-based sorbent looping cycle, ie cyclic calcination/carbonation, is one of the most
interesting technologies for CO2 capture during coal combustion and gasification processes …