MoS2Ti composite films were deposited on silicon wafers and AISI 440C steel substrates
with different target currents and working pressures by closed field unbalanced magnetron …

Abstract Pure MoS2 coating and MoS2-Ti composite coatings with different Ti content (5~
15wt.%) have been deposited by HTC 750 unbalanced magnetron sputtering system. The …

S/Mo ratio has a crucial effect on the tribological properties of MoS2–Ti composite films. The
deposition parameters as such bias voltage and working pressure play a dominant role on …

Deposition of MoS2-Ti composite thin films on the SKD 11 tool steel by dc magnetron
sputtering was studied. The influence of titanium interlayer and the ratio of MoS2 and …

A closed field unbalanced magnetron sputter (Teer-CFUBMS/550) system was used for the
deposition of MoS2-Ti composite coatings on steel substrate (AISI D2) using biased-dc and …

The easy shear of the MoS 2 film and thus the low coefficient of friction makes it one of the
excellent candidates for solid lubricant coatings. In this paper, the Ti content in MoS 2–Ti …

Abstract Ti-MoS 2 film and LaF 3 doped Ti-MoS 2 composite films are deposited using UDP
650 closed-field unbalanced magnetron sputtering. The microstructural and friction behavior …

The MoS2-Ti composite coatings were deposited by a hybrid high power impulse magnetron
sputtering (HIPIMS) source of Ti combined with a direct current magnetron sputtering (DC …

Sputter-deposited MoS 2 films have been often used as dry lubricant in various industrial
fields, such as space application and much attention has been paid to reduction of friction …

MoS 2-Ti composite solid lubricant films were deposited on an AISI D2 tool steel and silicon
wafer by CFUBMS (closed field unbalanced magnetron sputtering). The deposition process …