TiB2 doped MgB2 wires, with the component of Mg: B: TiB2= 1: 2: x (x= 0%, 5%, 8% and
10%), were fabricated through the in situ powder-in-tube method. Samples were sintered at …

We applied polymethyl-methacrylate (PMMA) as a new doping material for MgB2 and
fabricated C-doped MgB2 wires by in situ powder-in-tube (PIT) process. With increasing …

We report dc transport and magnetization measurements of the critical current density, Jc,
and microstructural analyses of MgB2 wires fabricated by the powder-in-tube method PIT …

Ti-sheathed monocore MgB2 wires with improved magnetic critical current density (Jc) have
been fabricated by in situ powder-in-tube (PIT) method and characterized by magnetization …

We present a detailed analysis of the effects of excess Mg on the lattice parameters, the
critical temperature (T c), the critical current (J c), the irreversibility field (H irr), and the upper …

We have successfully prepared monofilamentary MgB 2 wires and tapes with different
sheathed metals such as Cu, Ta/Cu and Fe by the powder-in-tube method. The phase …

We have fabricated the long TiC-doped MgB2 wires with 6 filaments by in-situ powder-in-
tube method using Nb as the barrier and copper as the stabilizer. To improve the strength of …

Magnesium diboride (MgB2) is a material with a superconducting transition temperature of
39 K. Discovered in 2001, the relatively large coherence length (and associated lack of …

Long dense MgB2 wires were successfully fabricated through the in situ powder-in-tube
method by using steel sheath with low carbon content. Short samples of MgB2/Fe wires …

Unreacted MgB 2 wires were made at Hyper Tech Research, USA by a continuous tube
forming and filling method using mixtures of Mg and B with and without SiC powder …