Functionally graded “Ti-base+(Ta, Ta2O5)-coatings” structure and its production using induction heat treatment
M Fomina, V Koshuro, A Shumilin, A Voyko… - Composite structures, 2020 - Elsevier
On the surface of the “Ti-base+ Ta-coating” layered system, tantalum oxide coatings were
obtained by induction heat treatment (IHT) within 600–1600° C for 1–120 s. It was …
obtained by induction heat treatment (IHT) within 600–1600° C for 1–120 s. It was …
Superhard titania coatings produced on titanium using induction heat treatment
A Fomin - Ceramics International, 2019 - Elsevier
Superhard titania coatings were prepared by high-temperature oxidation of commercially
pure (cp) titanium using induction heat treatment (IHT). IHT was performed at the …
pure (cp) titanium using induction heat treatment (IHT). IHT was performed at the …
Superhard Ta–O–N coatings produced on titanium using induction physical vapor deposition
Due to simulation by the finite element method, the temperature fields in the “inductor–
tantalum target–titanium product” system were calculated depending on the inductor current …
tantalum target–titanium product” system were calculated depending on the inductor current …
Effect of Si addition on mechanical properties and high temperature oxidation resistance of Ti–B–Si hard coatings
In this work the effect of Si addition on the mechanical properties and the high temperature
oxidation resistance of TiB 2 coatings is investigated. Nanocrystalline Ti–B–Si coatings were …
oxidation resistance of TiB 2 coatings is investigated. Nanocrystalline Ti–B–Si coatings were …
Titanium oxide coatings formed by plasma spraying followed by induction heat treatment
V Koshuro, E Osipova, O Markelova, M Fomina… - Ceramics …, 2023 - Elsevier
Porous titanium-containing coatings were formed on titanium samples by atmospheric
plasma spraying. The resulting samples were subjected to induction heat treatment in an …
plasma spraying. The resulting samples were subjected to induction heat treatment in an …
Microstructure and oxidation resistance of TiO2 modified multilayer coating prepared by HAPC/MAO
Y Zhang, S Lei, K Zhang, R Yang, G Qin, J Wang… - International Journal of …, 2022 - Elsevier
Abstract A TiO 2-Nb 2 O 5-SiO 2-Al 2 O 3/NbSi 2/NbAl 3 multilayer coating was prepared on
Nb alloys through halide activated pack cementation (HAPC) and micro-arc oxidation …
Nb alloys through halide activated pack cementation (HAPC) and micro-arc oxidation …
Functionally graded Ti (C, N) coatings and their production on titanium using solid-state carburization associated with induction heat treatment
On the titanium surface functionally graded layers in the form of carbonitride TiC 0.45–0.72
N 0.28–0.47 coatings were obtained by solid-state carburization associated with induction …
N 0.28–0.47 coatings were obtained by solid-state carburization associated with induction …
Preparation of layered α-Al2O3/TiO2 composite coating by pack cementation process and subsequent thermochemical treatment
Y Wang, S Feng, D Liu, C Zhang, J Xu, C Luo… - Surface and Coatings …, 2017 - Elsevier
Abstract An Al-Ti coating deposited by pack cementation technique was subjected to the
thermochemical treatment. The Al-Ti coating consisted of an outer AlTi-rich layer and an …
thermochemical treatment. The Al-Ti coating consisted of an outer AlTi-rich layer and an …
Investigation on thermal stability of Ta2O5, TiO2 and Al2O3 coatings for application at high temperature
P Shang, S Xiong, L Li, D Tian, W Ai - Applied surface science, 2013 - Elsevier
In this paper, tantalum pentoxide (Ta 2 O 5), titanium dioxide (TiO 2) and aluminum oxide (Al
2 O 3) coatings are deposited on silicon substrates by ion beam sputtering (IBS). The …
2 O 3) coatings are deposited on silicon substrates by ion beam sputtering (IBS). The …
[PDF][PDF] In-situ fabrication of TiC-Al2O3 and TiB2-TiC-Al2O3 composite coatings on 304 stainless steel surface using GTAW process
E Bahramizadeh, S Nourouzi, HJ Aval - Kovove Mater, 2019 - kovmat.sav.sk
The purpose of this study was to improve the performance of 304 stainless steel by applying
a wear-resistant coating. For this purpose, in-situ composite coatings of TiC-Al2O3, as well …
a wear-resistant coating. For this purpose, in-situ composite coatings of TiC-Al2O3, as well …