In this work, we investigated the fundamental plastic deformation mechanisms that can
contribute to the improved ductility of a newly developed Mg-2Zn-0.3 Ca-0.2 Ce-0.1 Mn1 …

A newly developed Mg–2Zn-0.3 Ca-0.2 Ce-0.1 Mn (in weight%, ZXEM2000) wrought alloy
exhibits an exceptionally high tensile ductility (29%±1.4% tensile elongation) along the …

Abstract Wrought Mg–Zn–Zr alloys with a strong basal texture usually exhibit highly
anisotropic plastic behavior, resulting in premature fracture during deformation at room …

In this work, the hot compression behavior and microstructure evolution of Mg-8Gd-3Y-xZn-
0.6 Zr (x= 0, 1.5) alloys were investigated by Gleeble-1500D thermal simulation test …

The tensile and compressive deformation behavior of a peak-aged cast Mg–11Y–5Gd–2Zn–
0.5 Zr (wt%)(WGZ1152-T6) alloy was investigated at temperatures between 25 and 400° C …

The current focus of research in Mg alloys is to develop wrought alloys suitable for the
automotive industry. The challenges to be overcome are low strength, poor ductility, and …

Abstract Mg–6.0 Zn–2.0 Yb–0.5 Zr (wt%) alloy exhibits excellent strength and ductility
synergy after thermomechanical and heat treatment. Unfortunately, the hot workability and …

High-temperature compression tests on the Mg-8Gd-3.5 Y-1.5 Zn-0.8 Mn alloy were
conducted using the Gleeble-3500 thermal-mechanical simulator. Flow stress and …

Improving the strength of the commercial ZK60 alloys plays a key role in promoting their
wide applications. In this work, a ZK60 alloy was prepared by conventional direct extrusion …

ABSTRACT Herein, an Mg–6Zn–2Ce–0.6 Zr alloy was prepared via the extrusion–shear
process. The dynamic compression mechanical performance and mechanism of …