Yttria (8 wt.%) stabilized zirconia (YSZ) with a NiCrAlY bond coat was atmospherically
plasma sprayed on mild steel substrates using various processing parameters including …

Yttria (8 wt.%) stabilized zirconia (YSZ) with a NiCrAlY bond coat was atmosphere plasma
sprayed on mild steel substrates. The bond coat thickness (100–250 μm), YSZ coating …

In this paper, the failure behavior of plasma-sprayed yttria-stabilized zirconia thermal barrier
coatings fabricated by atmospheric plasma spraying (APS-TBCs) under three-point bending …

An acoustic emission (AE) examination was conducted for the failure of ZrO2-8 wt% Y2O3
plasma-sprayed coatings incorporated in a tensile-adhesion test arrangement. The AE …

The heterogeneous nature of plasma-sprayed coatings plays a major role in their
mechanical properties. The fundamental deformation modes are usually classified as …

The influence of various factors on the thermal shock resistance of plasma-sprayed yttria-
stabilized zirconia (YSZ) coatings was investigated. The coatings, formed using different …

Yttria-stabilized zirconia (YSZ) thermal barrier coatings (TBCs) were prepared by
atmospheric plasma spraying (APS). SEM–EBSD–Raman spectroscopy evaluated the …

The adhesion and cohesion bond strengths of plasma sprayed yttria-stabilised zirconia
(YSZ) coatings were measured by performing the tensile adhesion test (TAT) and the tubular …

Alumina-yttria stabilized zirconia (Al 2 O 3-YSZ) composite coatings are recognized as a
potential alternative material for thermal barrier coatings. In this paper, Al 2 O 3-YSZ …

Failure of atmospheric plasma sprayed (APS) yttria-stabilized zirconia (YSZ) coatings is
complicated. Therefore, determining the microstructural changes that occur in the top coat …