Porous titanium-containing coatings were formed on titanium samples by atmospheric
plasma spraying. The resulting samples were subjected to induction heat treatment in an …

Metal oxide coatings on VT6 titanium alloy were formed by plasma spraying of aluminum
oxide powder and subsequent microarc oxidation at a current density from 1 to 3 kA/m 2. As …

By choosing the right conditions it is possible to produce thick open porous titanium coatings
by means of vacuum plasma spraying. In this work such coatings were produced using both …

Nanostructured and conventional alumina–3 wt.% titania coatings were deposited by air
plasma spraying (APS). The microstructure and phase composition of the coatings were …

TiO2 coatings were prepared by plasma spraying using a spray-dried powder as feedstock
material. A systematic study has been performed to determine how the titania slurry …

In this study, the effects of bond coat on the properties of Al2O3 and Al2O3–13wt.% TiO2
coatings, which is plasma sprayed onto a commercial pure titanium substrate with and …

The paper aims at development of TiO2, Ca5 (PO4) 3OH (hydroxyapatite, HA) and their
multilayer coatings onto stainless steel, titanium and aluminum substrate using suspension …

Al2O3 and its mixtures with TiO2 powders were prepared by a fused and crushed method.
Prepared powders were sprayed at 10, 12 and 16 kW power in atmospheric plasma …

The paper aims at reviewing of the recent studies related to the development of suspension
plasma sprayed TiO 2 and Ca 5 (PO 4) 3 OH (hydroxyapatite, HA) coatings as well as their …

The effects of plasma gas composition on the bond-strength of HA/Ti composite coatings
were investigated. HA/Ti composite coatings were deposited on titanium substrates by a …