The evolution of mechanical properties, namely Young's modulus, hardness, fracture
toughness and residual stresses of air plasma-sprayed 8 wt% Y 2 O 3-stabilized ZrO 2 …

Subjected to thermal cycling, the apparent Young's modulus of air plasma-sprayed (APS)
8wt.% Y2O3-stabilized ZrO2 (8YSZ) thermal barrier coatings (TBCs) was measured by …

The effect of sintering on the mechanical properties of free‐standing, plasma‐sprayed ZrO2–
8 wt% Y2O3 thick thermal barrier coatings (TBCs) was determined after annealing at 1316° …

The effect of heat treatment at 900° C in air on the microstructural and mechanical properties
of electron beam physical vapour deposited thermal barrier coatings (TBCs) was …

Young's moduli of zirconia top-coat and thermally growth oxide (TGO) formed underneath
the top-coat after high temperature exposure to an oxidizing atmosphere have been …

The mechanical properties and thermal shock resistance of plasma-sprayed 56 wt% Y 2 O 3-
stabilized ZrO 2 thick thermal barrier coatings (TTBCs) deposited with different critical …

The effects of starting powder morphology on the microstructure and mechanical properties
of thermal barrier coatings (TBCs) prepared by an air plasma spray (APS) were investigated …

Electron beam physical-vapor-deposited Y2O3-stabilized ZrO2 thermal barrier coating
(TBC) samples were indented from room temperature to 900° C using an instrumented high …

Mechanical characterization and contact damage of zirconia-based thermal barrier coatings
(TBCs) have been investigated using nanoindentation and Hertzian indentation tests. Two …

The failure mechanisms of air‐plasma‐sprayed ZrO2 thermal barrier coatings with various
microstructures were studied by microscopic techniques after thermal cycling. The elastic …