Comparison of structure and tribological properties of MoS2-Ti films deposited by biased-dc and pulsed-dc

E Arslan, Y Totik, I Efeoglu - Progress in Organic Coatings, 2012 - Elsevier
A closed field unbalanced magnetron sputter (Teer-CFUBMS/550) system was used for the
deposition of MoS2-Ti composite coatings on steel substrate (AISI D2) using biased-dc and …

The effect of deposition parameters and Ti content on structural and wear properties of MoS2Ti coatings

E Arslan, F Bülbül, A Alsaran, A Celik, I Efeoglu - Wear, 2005 - Elsevier
MoS2Ti composite films were deposited on silicon wafers and AISI 440C steel substrates
with different target currents and working pressures by closed field unbalanced magnetron …

Properties of sputter-deposited MoS2/metal composite coatings deposited by closed field unbalanced magnetron sputter ion plating

V Rigato, G Maggioni, A Patelli, D Boscarino… - Surface and coatings …, 2000 - Elsevier
It has been proved that the co-deposition of a proper amount of titanium can significantly
improve the properties of sputter-deposited MoS2 coatings, leading to the deposition of …

The effect of S/Mo ratio on structure and properties of MoSx-Ti composite coatings deposited by magnetron sputtering

T Wang, C Xue, S Yu, W Chen… - Materials Research …, 2020 - iopscience.iop.org
MoS x-Ti composite coatings with different S/Mo ratios were prepared by varying the
substrate bias voltage of magnetron sputtering. It was found that the S/Mo ratio of the as …

MoS2-Ti composite coatings on tool steel by dc magnetron sputtering

SK Kim, YH Ahn, KH Kim - Surface and Coatings Technology, 2003 - Elsevier
Deposition of MoS2-Ti composite thin films on the SKD 11 tool steel by dc magnetron
sputtering was studied. The influence of titanium interlayer and the ratio of MoS2 and …

The structure of tribologically improved MoS2–metal composite coatings and their industrial applications

VC Fox, N Renevier, DG Teer, J Hampshire… - Surface and Coatings …, 1999 - Elsevier
The properties of MoS2 coatings deposited by closed field unbalanced magnetron sputter
ion plating have been improved by the co-deposition of small amounts of metal [DG Teer et …

Tribological behaviour of high performance MoS2 coatings produced by magnetron sputtering

V Bellido-Gonzalez, AHS Jones, J Hampshire… - Surface and coatings …, 1997 - Elsevier
A series of new MoS2 coatings have been developed at Teer Coatings Ltd. It has been
proved that the new deposition method enhances the coating performance and the …

Effect of crystallographic orientation on the friction and wear properties of MoxSy–Ti coatings by pulsed-dc in nitrogen and humid air

I Efeoglu, F Bulbul - Wear, 2005 - Elsevier
This work reports on the structural and wear properties of MoxSy–Ti films, deposited on D2,
52100, and 440C steel substrates by pulsed-dc magnetron sputtering. A closed field …

Effect of Working Pressure on Tribological Properties of Ce-Ti/MoS2 Coatings Using Magnetron Sputter

C Tian, H Cai, Y Xue - Coatings, 2022 - mdpi.com
In preparing MoS2-based coatings by magnetron sputtering, the working pressure of the
vacuum chamber directly affects the number and kinetic energy of sputtering particles, which …

Effect of power mode, target type and liquid nitrogen trap on the structure and tribological properties of MoSx coatings

J Wang, W Lauwerens, E Wieers, LM Stals, J He… - Surface and Coatings …, 2002 - Elsevier
MoSx coatings were prepared with an unbalanced DC magnetron-sputtering system by
varying the DC power mode, target type and liquid nitrogen trap. The composition and …