Fabrication and photovoltaic properties of Cu2ZnSnS4/ia-Si/na-Si thin film solar cells

F Jiang, H Shen - Applied surface science, 2013 - Elsevier
Cu2ZnSnS4 (CZTS) films were successfully prepared by sulfurization of Zn/Sn/Cu
multilayers at different temperatures from 350–575̊C. The film sulfurized at 500̊C …

Electrical and optical properties of Cu2ZnSnS4 thin films prepared by rf magnetron sputtering process

JS Seol, SY Lee, JC Lee, HD Nam, KH Kim - Solar energy materials and …, 2003 - Elsevier
Cu2ZnSnS4 thin films were deposited on corning 7059 glass substrates without substrates
heating by rf magnetron sputtering. The Cu/(Zn+ Sn) ratio of the thin film sputtered at 75W …

Preparation of Cu2ZnSnS4 thin films by hybrid sputtering

T Tanaka, T Nagatomo, D Kawasaki, M Nishio… - Journal of Physics and …, 2005 - Elsevier
In order to fabricate Cu2ZnSnS4 thin films, hybrid sputtering system with two sputter sources
and two effusion cells is used. The Cu2ZnSnS4 films are fabricated by the sequential …

Chemical composition dependence of morphological and optical properties of Cu2ZnSnS4 thin films deposited by sol–gel sulfurization and Cu2ZnSnS4 thin film solar …

K Tanaka, Y Fukui, N Moritake, H Uchiki - Solar Energy Materials and Solar …, 2011 - Elsevier
The properties of Cu2ZnSnS4 (CZTS) thin films deposited by sol–gel sulfurization were
investigated as a function of the chemical composition of the sol–gel solutions used. The …

Preparation and Characterization of Cu2ZnSnS4 Thin Films and Solar Cells Fabricated from Quaternary Cu‐Zn‐Sn‐S Target

M Xie, D Zhuang, M Zhao, Z Zhuang… - International Journal …, 2013 - Wiley Online Library
CZTS thin films were fabricated through sputtering from a quaternary Cu‐Zn‐Sn‐S target,
followed by a sulfurization process. CZTS thin‐film solar cells were also fabricated and a …

Development of thin film solar cell based on Cu2ZnSnS4 thin films

H Katagiri, K Saitoh, T Washio, H Shinohara… - Solar Energy Materials …, 2001 - Elsevier
Cu2ZnSnS4 (hereafter CZTS) thin films were successfully formed by vapor-phase
sulfurization of precursors on a soda lime glass substrate (hereafter SLG) and a Mo-coated …

Influence of precursor sulfur content on film formation and the properties of sulfurized Cu2ZnSnS4 thin films for solar cells

DH Son, DH Kim, KJ Yang, D Nam… - … status solidi (a), 2014 - Wiley Online Library
This is the Cu2ZnSnS4 (CZTS) films were fabricated on glass substrates by sputtering using
compound material targets. The fabrication method combines the deposition of metallic …

Preparation and properties of Cu2ZnSnS4 absorber and Cu2ZnSnS4/amorphous silicon thin-film solar cell

F Jiang, H Shen, W Wang, L Zhang - Applied Physics Express, 2011 - iopscience.iop.org
Abstract Cu 2 ZnSnS 4 (CZTS) films were successfully fabricated on glass by sulfurizing the
sputtered Zn/Sn/Cu multilayer precursor. The preferred (112) orientation was observed by X …

Fabrication of Cu2ZnSnS4 films by sulfurization of Cu/ZnSn/Cu precursor layers in sulfur atmosphere for solar cells

RBV Chalapathy, GS Jung, BT Ahn - Solar Energy Materials and Solar …, 2011 - Elsevier
Cu2ZnSnS4 (CZTS) absorbers were grown by sulfurization of Cu/ZnSn/Cu precursors in
sulfur atmosphere. The reaction mechanism of CZTS formation from the precursor was …

Synthesis and characterization of co-electroplated Cu2ZnSnS4 thin films as potential photovoltaic material

Y Cui, S Zuo, J Jiang, S Yuan, J Chu - Solar Energy Materials and Solar …, 2011 - Elsevier
Cu2ZnSnS4 thin films have been successfully prepared by a novel synthesis process that
involves a single step deposition of Cu2ZnSnS4 followed by a post-annealing treatment at …