The present paper investigates the cutting parameters pertaining to the turning of X2CrNi18-
09 austenitic stainless steel that are studied and optimized using both RSM and desirability …

Stainless steel is characterized by a poor machinability due to its high ductility, and low
thermal conductivity. The objective of this work is to model the output responses namely; …

The present research work investigated the machining of AISI304 austenitic stainless steel
in terms of machining force evolution, power consumption, specific cutting force and surface …

The current study aims at investigating the influence of different machining parameters such
as cutting speed (V c), feed (f) and depth of cut (t) on different performance measures during …

The intention of investigating the alternative cutting tool performance, namely cermet insert
to support the usage of coated cemented carbide for enhancing the productivity in turning of …

AISI 52100 steel is considerably attracted in making bearings and shafts due to its greater
strength and better corrosion immunity. Hard turning with a coated carbide tool has many …

An experimental study is carried out to investigate the performance of the cutting tool
regarding the insert wear, surface roughness, cutting forces, cutting power and material …

This study focuses on the performance evaluation of CBN and ceramic tools in dry
machining of gray cast iron EN GJL-350. The machining factors taken into account during …

In the current paper, cutting parameters during turning of AISI 304 Austenitic Stainless Steel
are studied and optimized using Response Surface Methodology (RSM) and the desirability …

The present work concerns an experimental study of turning with coated cermet tools with
TiCN-TiN coating layer of AISI 52100 bearing steel. The main objectives are firstly focused …