In preparing MoS2-based coatings by magnetron sputtering, the working pressure of the
vacuum chamber directly affects the number and kinetic energy of sputtering particles, which …

Abstract Pure MoS2 coating and MoS2-Ti composite coatings with different Ti content (5~
15wt.%) have been deposited by HTC 750 unbalanced magnetron sputtering system. The …

Exploring the doping components of the coating is of great significance for improving the
tribological properties of the MoS2-based coating. The optimization of magnetron sputtering …

MoS x-Ti composite coatings with different S/Mo ratios were prepared by varying the
substrate bias voltage of magnetron sputtering. It was found that the S/Mo ratio of the as …

Pure MoS2 coatings are easily affected by oxygen and water vapor to form MoO3 and
H2SO4 which cause a higher friction coefficient and shorter service life. In this work, five …

The MoS 2 coatings were prepared by unbalanced magnetron sputtering system. Ti was
used as the dopant to improve its mechanical properties and oxidation resistance. The …

MoS 2+ Zr composite coatings with different Zr contents and their pure MoS 2 counterparts
were deposited on silicon wafers and steel substrates by closed field unbalanced …

Solid-lubricant MoS2 coatings have been successfully applied in high vacuum and
aerospace environments. However, these coatings are very sensitive to water vapor and not …

In order to investigate the microstructures and properties of Mo 2 N+ MoS 2 coatings, MoS 2,
Mo 2 N and Mo 2 N+ MoS 2 coatings were deposited by direct current magnetron sputtering …

This paper explores the effects of atmosphere on the tribological behavior of MoS 2 coatings
deposited on the AISI304 steel using magnetron sputtering. The wear resistance and …