Specimens of plasma-sprayed zirconia thermal barrier coatings with three different
porosities and different initial particle sizes were deformed in compression at initial loads of …

Specimens of plasma‐sprayed‐zirconia thermal‐barrier coatings with three different
porosities and different initial particle sizes were deformed in compression at initial loads of …

The purpose of this study was to determine the creep/sintering characteristics of thermally
sprayed zirconia coatings and attempt to understand the influence of microstructure on the …

Thermally sprayed ceramic coatings deposited from nanostructured feedstock powder have
often demonstrated improved properties relative to coatings produced from conventional …

The effect of coating porosity and thickness on the resistance to damage of yttria stabilized
zirconia thermal barrier coatings in an oxidizing environment by thermal cycling was …

Investigations of changes in phase composition, mechanical properties, and microstructure
of ZrO2‐based plasma‐sprayed thermal barrier coatings (TBCs) with 8 mol% CeO2, 19.5 …

Recent work has demonstrated that the thermal fatigue life of thermal barrier coatings (TBC)
plasma-sprayed with sol gel processed zirconia-7wt% yttria increases by a factor of 5 when …

Effect of test rate on elevated‐temperature strength for the thick thermal barrier coatings of
plasma‐sprayed ZrO28 wt% Y2O3 was determined in flexure at 800C in air. The coating …

The effects of process parameters on thermal barrier coating (TBC) formation and
microstructural properties have been studied. Further understanding of the evolution of …

A number of plasma-sprayed yttria-stabilized zirconia coatings were prepared representing
a combination of significantly different starting powders and different plasma torch designs …