This paper focuses on treatment of oily wastewater coming out from the post-treatment unit
of petroleum industries where finely divided oil droplets are uniformly dispersed in large …

This paper focuses on the treatment of oily wastewater coming out from the post-treatment
unit of petroleum industries using cross-flow mode of ultrafiltration. Four types of polysulfone …

Polyethersulfone (PES) membranes modified by the amphiphilic copolymer Pluronic F127
were applied to the separation of oil/water emulsion. Due to the enhanced surface …

For separation of oil and water mixture using ultrafiltration (UF), polysulfone (Psf)
membranes were synthesized by phase inversion method using N-methyl-2-pyrrolidone …

Effectiveness of a poly (vinyl alcohol)(PVA) membrane selected for ultrafiltration of synthetic
oily water was evaluated in this study. The experiments were conducted by using a pilot …

Abstract Polyethersulfone (PES)/sulfonated polysulfone (SPSf)/TiO 2 mixed matrix
membranes (MMMs) were fabricated using non-solvent induced phase inversion (NIPS) …

This contribution describes the surface modification of low molecular weight cutoff
regenerated cellulose ultrafiltration membranes by grafting poly (N-isopropylacrylamide) …

A microporous hydrophobic membrane allows the permeation of an oil phase at almost zero
pressure and retains the water. The separation of dilute oil-in-water mixtures using flat sheet …

The effects of different operating conditions on ultrafiltration (regenerated cellulose with a cut-
off of 100kg/mol) of cutting oil were studied for two different cases. The factors, examined at …

Wastewater from a household appliance factory containing emulsified oil was treated using
a separation method based on an ultrafiltration membrane. Initial wastewater characteristics …