The failure of thermal barrier coatings (TBCs) during operation depends mainly on the
thermal mismatch between the ceramic top coat (TC) and the metal bond coat (BC). The …

A physical geometric model of the dynamic growth of thermally grown oxide (TGO) was
established based on an analysis of the TGO growth of 8YSZ thermal barrier coatings during …

Formation of thermally grown oxide (TGO) on the interface between top coat (TC) and bond
coat (BC) is critical for thermal barrier coating system (TBCs) failure during long-term …

The lifetime of ceramic thermal barrier coatings (TBCs) is significantly affected by the growth
of a dense alumina scale at the interface between TBC and the bond coat (BC), the so …

The growth of thermally grown oxide (TGO) is a significant factor affecting the failure
mechanism of thermal barrier coatings (TBCs) during cyclic high temperature service. In this …

Failures in thermal barrier coatings (TBCs) are often associated with a thermally grown
oxide (TGO) due to thermal mismatch and the growth stress associated with growth of TGO …

Failures in thermal barrier coatings (TBCs) are associated with the build-up of residual
stresses that result from thermal cycling, growth strain, and stress relaxation associated with …

The local stress associated with the presence and growth of irregular thermally grown oxide
(TGO) layer between bond coat (BC) and top coat (TC) may induce micro-cracks and …

The growth stress induced by thermally grown oxide (TGO) is one of the main reasons for
the failure of thermal barrier coatings (TBCs). In this study, the failure behavior of TBCs was …

The residual stresses could cause extensive damage to thermal barrier coatings and even
failure. A finite element model of thermal barrier coating system had been designed to …