Effect of sintering on mechanical properties of cold sprayed thermal barrier coatings

AC Karaoglanli, A Turk, I Ozdemir - Surface Engineering, 2016 - journals.sagepub.com
In this study, thermal barrier coatings were deposited on nickel-based super-alloy with
CoNiCrAlY bond and yttria partially stabilised zirconia top coats, using cold gas dynamic …

Microstructural studies and residual stress evolution in zirconia-based thermal barrier coatings

P Bengtsson - 1995 - osti.gov
Thick thermal barrier coatings consisting of NiCrAlY bond coating and a 1.4 mm thick
Zirconia-based top coating were air plasma sprayed onto grit blasted nickel-base substrates …

Thermal properties and phase stability of Yttria-Stabilized Zirconia (YSZ) coating deposited by Air Plasma Spray onto a Ni-base superalloy

DF Zambrano, A Barrios, LE Tobón, C Serna… - Ceramics …, 2018 - Elsevier
Thermal properties and microstructure characterization of Yttria Stabilized Zirconia (YSZ)
Thermal Barrier Coatings (TBCs) deposited by Air Plasma Spray (APS) onto a Ni-base …

[PDF][PDF] Isothermal oxidation behavior of plasma sprayed conventional and nanostructured ysz thermal barrier coatings

A Paraschiv, A Banu, C Doicin… - UPB Sci. Bull. Ser. B …, 2020 - scientificbulletin.upb.ro
In this study, conventional and nanostructured yttria-stabilized zirconia (YSZ) thermal barrier
coatings (TBCs) were deposited by atmospheric plasma spraying (APS) on Ni superalloy …

[PDF][PDF] Development of Air Plasma Thermal Spray Coating for Thermal Barrier Coating and Oxidation Resistance Applications on Ni-Base Super Alloys

K Ahmed, M Shoeib - Sch. J. Appl. Sci. Res, 2018 - innovationinfo.org
Aerospace gas turbine engines are now designed such that the heat resistant super alloys
operate at temperature very close to their melting, so current strategies for performance …

Heat treatment of thermal barrier coatings

AN Khan, J Lu, H Liao - Materials Science and Engineering: A, 2003 - Elsevier
Thermal barrier coatings (TBCs) with CoNiCrAlY bond-coat and 0.3 mm thick zirconia top-
coat were air plasma sprayed (APS) onto a nickel-base super alloy, Hastelloy-X and 316L …

Modelled and measured residual stresses in plasma sprayed thermal barrier coatings

P Bengtsson, C Persson - Surface and Coatings Technology, 1997 - Elsevier
Thermal barrier coatings consisting of a NiCrAlY bond coating and a 1.4 mm thick partially
stabilised zirconia top coating were air plasma sprayed onto grit blasted nickel-base …

Enhanced thick thermal barrier coatings that exhibit varying porosity

A Scrivani, G Rizzi, CC Berndt - Materials Science and Engineering: A, 2008 - Elsevier
Thick thermal barrier coatings (TBCs) are defined within the current work as coatings that
range from 1.5 to 2mm in thickness. The microstructure and the porosity of the yttria partially …

Mechanical properties of thermal barrier coatings after isothermal oxidation.: Depth sensing indentation analysis

A Rico, J Gómez-García, CJ Múnez, P Poza… - Surface and Coatings …, 2009 - Elsevier
Thermal barrier coatings (TBC) are extensively used to protect metallic components in
applications where the operating conditions include aggressive environment at high …

[PDF][PDF] Plasma-Sprayed and Physically Vapor Deposited Thermal Barrier Coatings: Comparative Analysis of Thermoelastic Behavior Based on Curvature Studies

OA Zubacheva - 2004 - Citeseer
The thermomechanical properties of various coating materials produced by plasma spraying
(PS) and electron-beam physical vapor deposition (EB-PVD) were studied to gain a better …