In order to improve the mechanical properties of TiAl alloys, micro-nano Ti 2 AlC-reinforced
TiAl composites were successfully fabricated by means of spark plasma sintering (SPS) …

In the present work, using pre-alloyed Ti-48Al-2Cr-2Nb powders and graphene nanosheets
as raw materials, the TiAl matrix composite reinforced by submicro/nano-Ti 2 AlC was …

To strengthen TiAl alloys, micro-nano Ti 2 AlC precipitates were fabricated in situ by spark
plasma sintering using Ti–48Al–2Nb–2Cr pre-alloyed powder and multilayer graphene …

In the present work, Ti 2 AlC/TiAl composites with network architecture were fabricated by
the method of spark plasma sintering (SPS) at different temperature using Ti–48Al–2Cr–2Nb …

In order to acquire TiAl composites with a multi-scale reinforcing phase, and to improve the
microstructure and tensile properties at elevated temperatures, TiAl alloys have been …

In the present work, Ti 2 AlC/TiAl composite with a bioinspired laminated structure was
fabricated by an in-situ reactive vacuum hot-pressing sintering using flake powder …

Abstract TiAl-5wt.% Ti 2 AlC-3wt.% Mn composites reinforced by the addition of Mn and in
situ synthesized Ti 2 AlC nanoparticles with a novel microstructure were fabricated. The …

Induction hot-pressing sintering, as an effective sintering technique, has been rarely
investigated and reported in the sintering of TiAl alloys. In this paper, in-situ nano/micron Ti 2 …

The microstructure, mechanical and dry-sliding tribological properties of TiAl-based
composites with 20 and 40 vol% in situ formed Ti 2 AlC, produced by hot press sintering …

The effect of spark plasma sintering (SPS) temperature on the microstructure and
mechanical properties of a bulk ultrafine structured Ti2AlC/TiAl composite prepared by SPS …