TiAl metal-based composite coatings are fabricated by laser cladding on Ti-6Al-4V (TC4)
surfaces to improve their wear resistance and expand its application rang. In this study, the …

Abstract The TiC reinforced Ti 2 AlNb-based coatings were fabricated on the surface of Ti-
6Al-4V using Ti, Al, and Nb powder mixtures with different NbC addition (0, 1.25, 2.5, and 5 …

In this study, a laser melting deposition (LDM) process was employed to deposit titanium
matrix composite (TMC) coatings on a titanium alloy substrate by adding 1–5 wt% nanosized …

In this study, a compositionally graded Tisingle bondAl intermetallic coating has been
successfully fabricated by laser powder deposition (LPD) with Ti6Al4V and AlSi10Mg …

In situ ceramic phase reinforced Ti-based composite coatings were successfully fabricated
on Ti-6Al-4V alloys by laser cladding using Ti+ Al+ Si mixed powders with different NbC …

In-situ formation of TiC, Ni 3 Ti and Ti 2 (Ni, Al) with CNTs reinforced Ti-based composite
coatings were fabricated by laser alloying processing. The effect of laser specific energy on …

Titanium intermetallics are highly significant to protect surfaces of lightweight structures
against corrosion and wear. In this study, Ti and Al powders were uniformly mixed with an …

Abstract TiNi/Ti 2 Ni-based composite coatings reinforced by TiC and TiB 2 were produced
on Ti6Al4V by laser cladding the mixture of a Ni-based alloy and different contents of B 4 C …

Titanium alloy is a major structural material with excellent high specific strength in
aerospace applications. Cubic boron nitride (cBN) is a synthetic wear-resistant material with …

To enhance the tribological performance and avoid the surface failure of TC4 alloys under
severe wear conditions, Ti-30Al-16Ni-3Si, Ti-48Al-3Si, and Ti-50Al (at.%) coatings were …