To strengthen TiAl alloys, micro-nano Ti 2 AlC precipitates were fabricated in situ by spark
plasma sintering using Ti–48Al–2Nb–2Cr pre-alloyed powder and multilayer graphene …

In order to improve the mechanical properties of TiAl alloys, micro-nano Ti 2 AlC-reinforced
TiAl composites were successfully fabricated by means of spark plasma sintering (SPS) …

To enhance the mechanical properties and service temperature of TiAl alloy, the dual-scale
Ti 2 AlC particles reinforced TiAl composites were successfully designed and fabricated by …

In order to acquire TiAl composites with a multi-scale reinforcing phase, and to improve the
microstructure and tensile properties at elevated temperatures, TiAl alloys have been …

The hot deformation behavior and microstructure evolution of a PM TiAl alloy with a nominal
composition of Ti-45Al-10Nb (at%.) reinforced with Ti 2 AlC particles were investigated by …

The Ti2AlC/TiAl composite with a homogenous architecture was fabricated via spark plasma
sintering (SPS) using Ti/Al/GNSs composite powders, after ultrasonic mechanical stirring, as …

Abstract TiAl-5wt.% Ti 2 AlC-3wt.% Mn composites reinforced by the addition of Mn and in
situ synthesized Ti 2 AlC nanoparticles with a novel microstructure were fabricated. The …

Induction hot-pressing sintering, as an effective sintering technique, has been rarely
investigated and reported in the sintering of TiAl alloys. In this paper, in-situ nano/micron Ti 2 …

An in-depth understanding of the deformation behavior of a nanolamellar TiAl/Ti 3 Al
composite is prerequisite to control the mechanical properties of this material. Nevertheless …

An in-situ dual morphology of Ti 2 AlC/TiB 2 nanoparticles was refined and enhanced to
fabricate Ti-47.7 Al-7.1 Nb-2.3 V-1.1 Cr composites via induction hot-pressing sintering with …