Low-cyclic fatigue behavior of modified 9Cr–1Mo steel at elevated temperature
K Guguloth, S Sivaprasad, D Chakrabarti… - Materials Science and …, 2014 - Elsevier
The low-cycle fatigue behavior of indigenously developed modified 9Cr–1Mo steel has been
evaluated using a constant strain rate (1× 10− 3 s− 1) at ambient temperature (25° C) and at …
evaluated using a constant strain rate (1× 10− 3 s− 1) at ambient temperature (25° C) and at …
Deformation behavior of modified 9Cr–1Mo steel under low cycle fatigue at 600° C
Low cycle fatigue (LCF) behavior of the modified 9Cr–1Mo steel was studied in normalized
& tempered condition in the regime of low strains, at total strain amplitudes from±0.25 …
& tempered condition in the regime of low strains, at total strain amplitudes from±0.25 …
Low cycle fatigue behavior of modified 9Cr-1Mo steel at 300 C
Low cycle fatigue (LCF) behavior of modified 9Cr–1Mo steel is studied at 300° C, in the
domain of dynamic strain aging (DSA), over a wide range of total strain amplitudes (∆ ε t/2) …
domain of dynamic strain aging (DSA), over a wide range of total strain amplitudes (∆ ε t/2) …
Low cycle fatigue behavior of modified 9Cr–1Mo steel at room temperature
Low cycle fatigue (LCF) behavior of modified 9Cr–1Mo steel was studied in normalized and
tempered condition at strain rates from 10− 2 s− 1 to 10− 4 s− 1 in the regime of low strain …
tempered condition at strain rates from 10− 2 s− 1 to 10− 4 s− 1 in the regime of low strain …
Low cycle fatigue behavior and microstructural evolution of modified 9Cr–1Mo ferritic steel
V Shankar, M Valsan, KBS Rao, R Kannan… - Materials Science and …, 2006 - Elsevier
In the present paper, influence of hold time on the high temperature low cycle fatigue (LCF)
behavior of modified 9Cr–1Mo ferritic steel in the normalized and tempered condition is …
behavior of modified 9Cr–1Mo ferritic steel in the normalized and tempered condition is …
Influence of temperature on the low cycle fatigue behaviour of a modified 9Cr–1Mo ferritic steel
A Nagesha, M Valsan, R Kannan, KBS Rao… - International Journal of …, 2002 - Elsevier
Low cycle fatigue (LCF) behaviour of a modified 9Cr–1Mo steel under normalized and
tempered conditions is reported. The alloy was normalized at 1313K for 1 h followed by …
tempered conditions is reported. The alloy was normalized at 1313K for 1 h followed by …
Contribution of microstructure and slip system to cyclic softening of 9 wt.% Cr steel
DW Kim, SS Kim - International journal of fatigue, 2012 - Elsevier
Tensile and low cycle fatigue tests of 9wt.% Cr steel were conducted in the temperature
range of RT-600° C. Tensile strength and fatigue life decreased with increasing temperature …
range of RT-600° C. Tensile strength and fatigue life decreased with increasing temperature …
Comparative evaluation of the low cycle fatigue behaviours of P91 and P92 steels
In the present paper, low cycle fatigue (LCF) behaviour of modified 9Cr-1Mo steel (P91
steel) and tungsten allo ed 9Cr steel (P92 steel) is presented. Total axial strain controlled …
steel) and tungsten allo ed 9Cr steel (P92 steel) is presented. Total axial strain controlled …
Low cycle fatigue and creep fatigue interaction behavior of 9Cr-0.5 Mo-1.8 WV-Nb heat-resistant steel at high temperature
Abstract In this paper, Low Cycle Fatigue (LCF) and Creep-Fatigue Interaction (CFI)
behavior of 9Cr-0.5 Mo-1.8 WV-Nb heat-resistant steel (ASME Grade P92 steel) at elevated …
behavior of 9Cr-0.5 Mo-1.8 WV-Nb heat-resistant steel (ASME Grade P92 steel) at elevated …
Dynamic strain aging behavior of modified 9Cr–1Mo and reduced activation ferritic martensitic steels under low cycle fatigue
K Mariappan, V Shankar, R Sandhya… - Journal of Nuclear …, 2013 - Elsevier
Influence of temperature and strain rate on low cycle fatigue (LCF) behavior of modified 9Cr–
1Mo ferritic martensitic steel and 1.4 W–0.06 Ta reduced activation ferritic martensitic …
1Mo ferritic martensitic steel and 1.4 W–0.06 Ta reduced activation ferritic martensitic …