The structural and chemical homogeneity of the developed thin film upon color etching a low-
carbon steel specimen with Beraha-I type color etchant was investigated by spectroscopic …

A grey cast iron specimen was investigated by Beraha-I type color etching for the purpose of
developing a functional model for the etching kinetics and subsequently a method which …

Cold rolled steel specimens were investigated by color etching. We proved that in this
sample ferrite grains with a surface normal close to the (111) orientation are etched with the …

Color etching is a useful corrosive process, widely applied in metallography to study the
microstructure of metals. To prove the existence of the previously hypothesized steady-state …

In the present study, the structure, microrelief and optical properties of the iron films
deposited onto silica and silicon substrates by thermal evaporation have been evaluated …

Color etching is an extremely effective metallographic technique not only for making grains
well visible, but also for making them distinguishable for automated image analyzers. During …

A lot of phases can be present in the structure of cast iron depending on the quality and the
heat treatment processes. By using the color etching, the different phases–eg the carbides …

In material science, and particularly in metallography, various etching processes are
frequently used to visualize grain structure. For some etching processes, it is sufficient to …

In situ optical microscopy investigation was performed on a Cu99. 9 copper sample during
color etching with Beraha˗ I etchant for approximately 48 min in a microfluidic cell. The color …

Color etchants have a huge potential in industrial applications and numerous investigations
have been made to obtain a better understanding of the etching process. However …