Additive manufacturing (AM) is a cutting-edge technique that builds parts by adding layers
from a digital design and depositing materials selectively where required. AM is vital in …

Inconel 718, a Ni-based superalloy, was prepared by powder laser bed fusion (P-LBF)
additive manufacturing (AM) method. AM of the Inconel 718 is challenging, as this particular …

The design of a two-step heat treatment (solutionizing and aging) protocol for laser-powder
bed fused Ti-6Al-2Sn-4Zr-2Mo (L-PBF-Ti-6242) and its effect on microstructure and …

This study examined the effect of variations in the laser power and scan speed for 52.39
at.% Ni-47.61 at.% Ti samples produced via laser powder bed fusion (L-PBF). The laser …

Thermal management is one of the most promising applications of Al parts fabricated by
additive manufacturing, primarily due to the drastically expanded design space enabled by …

Abstract Defect-free SLM-IN 738LC superalloy samples were fabricated using selective
laser melting (SLM). The as-built samples exhibit a cellular structure with fine carbides, γ …

The microstructural stability of aluminum alloy hemispherical components in gyroscope
navigation systems is the determinant for navigation precision. In this work, a thermal-cold …

In order to improve the bonding strength of FeCoCrNiMn cladding layer, laser power,
scanning speed and powder feeding rate were selected as the optimization variables; the …

As environmental concerns gain prominence worldwide, the significance of sustainable
building practices cannot be understated. The burgeoning production of waste annually …

Cold spray additive manufacturing (CSAM) technology offers a viable way for the
preparation of copper matrix composites. However, weak inter-particle bonding constrains …