Evolution of cold-rolled microstructures of biomedical Co-Cr-Mo alloys with and without N doping
M Mori, K Yamanaka, H Matsumoto, A Chiba - Materials Science and …, 2010 - Elsevier
The effects of nitrogen doping on microstructural evolution during cold rolling of Ni free Co-
Cr-Mo alloys have been investigated. Nitrogen doping improved the cold workability of this …
Cr-Mo alloys have been investigated. Nitrogen doping improved the cold workability of this …
高氮奥氏体不锈钢与316L 不锈钢的冷变形行为研究
王松涛， 杨柯， 单以银， 李来风 - 金属学报, 2007 - cqvip.com
以一种含氮量达1.0%(质量分数) 的高氮奥氏体不锈钢N10 和316L 不锈钢为研究对象,
通过在室温下对这两种材料施加不同的压缩变形量, 研究了两种材料变形后的显微组织 …
通过在室温下对这两种材料施加不同的压缩变形量, 研究了两种材料变形后的显微组织 …
Performance and characterization of TWIP steels for automotive applications
RW Neu - Materials performance and …, 2013 - asmedigitalcollection.asme.org
This article reviews the current state of the art in understanding twinning-induced plasticity
(TWIP) steels with an emphasis on linking microstructure to mechanical behavior by means …
(TWIP) steels with an emphasis on linking microstructure to mechanical behavior by means …
Evaluation of the role of deformation twinning in work hardening behavior of face-centered-cubic polycrystals
F Hamdi, S Asgari - Metallurgical and Materials Transactions A, 2008 - Springer
Results of an investigation on the evolution of microstructure during simple compression
testing of two face-centered-cubic (fcc) polycrystals, IN625 superalloy and 316L stainless …
testing of two face-centered-cubic (fcc) polycrystals, IN625 superalloy and 316L stainless …
Grain-orientation-dependent of γ–ε–α′ transformation and twinning in a super-high-strength, high ductility austenitic Mn-steel
M Eskandari, A Zarei-Hanzaki… - Materials Science and …, 2016 - Elsevier
A newly developed, austenitic lightweight steel, containing a low-density element, Al,
exhibits tensile elongation up to 50% as well as high ultimate-tensile stress (tensile fracture …
exhibits tensile elongation up to 50% as well as high ultimate-tensile stress (tensile fracture …
On the low-cycle fatigue response of pre-strained austenitic Fe61Mn24Ni6. 5Cr8. 5 alloy showing TWIP effect
HG Lambers, CJ Rüsing, T Niendorf, D Geissler… - International journal of …, 2012 - Elsevier
The low-cycle fatigue behavior of a high manganese austenitic alloy showing TWIP
(Twinning-Induced Plasticity) in its homogenized as-received (AsRec) and in pre-strained …
(Twinning-Induced Plasticity) in its homogenized as-received (AsRec) and in pre-strained …
Achievement of grain boundary engineering by transforming residual stress in selective laser-melted Inconel 718 superalloy
B Liu, Y Ding, J Xu, X Wang, Y Gao, Y Hu… - Materials Science and …, 2023 - Elsevier
The complicated geometric parts produced by selective laser melting (SLM) are not
amenable to grain boundary engineering (GBE), which is primarily implemented via …
amenable to grain boundary engineering (GBE), which is primarily implemented via …
Severe plastic deformation of a TWIP steel
The severe plastic deformation of a Twinning Induced Plasticity (TWIP), 0.61 C–22.3 Mn–
0.19 Si–0.14 Ni–0.27 Cr (wt%) steel by Equal Channel Angular Pressing (ECAP) at elevated …
0.19 Si–0.14 Ni–0.27 Cr (wt%) steel by Equal Channel Angular Pressing (ECAP) at elevated …
镁合金温变形过程中的孪生及孪晶交叉
杨续跃， 张雷 - 金属学报, 2009 - cqvip.com
对AZ31 镁合金在3 种温度(523,573 和673 K) 下进行了单向压缩变形. 在523 K, 当真应变ε
达到0.22 时真应力-真应变曲线出现尖锐的应力峰值, 在应力峰值之前先后经历了缓慢加工硬化 …
达到0.22 时真应力-真应变曲线出现尖锐的应力峰值, 在应力峰值之前先后经历了缓慢加工硬化 …
Low cycle fatigue behavior of 316LN stainless steel alloyed with varying nitrogen content. Part I: cyclic deformation behavior
GV Prasad Reddy, R Sandhya, S Sankaran… - … Materials Transactions A, 2014 - Springer
In this study, the influence of cyclic strain amplitude on the evolution of cyclic stress–strain
response and the associated cyclic deformation mechanisms in 316LN stainless steel with …
response and the associated cyclic deformation mechanisms in 316LN stainless steel with …